\\
パソコン・スマホ・タブレット設定・IoT家電のお困りごとを解決！全国対応 G・O・G
===== S.M.A.R.Tとは... =====
S.M.A.R.Tは「Self Monitoring, Analysis, and Reporting Technology」の略で、HDDが自身の障害を自己診断して、ユーザに報告するインテリジェントな機能である。\\
===== smartmontoolsインストール =====
smartctlを利用するためには、smartmontoolsパッケージをインストールする。\\
$ sudo dnf install smartmontools
メタデータの期限切れの最終確認: 2:09:01 時間前の 2022年09月23日 12時04分15秒 に実施しました。 依存関係が解決しました。 =============================================================================================================== パッケージ アーキテクチャー バージョン リポジトリー サイズ =============================================================================================================== インストール: smartmontools x86_64 1:7.3-2.fc36 updates 595 k 依存関係のインストール: smartmontools-selinux noarch 1:7.3-2.fc36 updates 23 k トランザクションの概要 =============================================================================================================== インストール 2 パッケージ ダウンロードサイズの合計: 618 k インストール後のサイズ: 2.0 M これでよろしいですか? [y/N]: y パッケージのダウンロード: (1/2): smartmontools-selinux-7.3-2.fc36.noarch.rpm 99 kB/s | 23 kB 00:00 (2/2): smartmontools-7.3-2.fc36.x86_64.rpm 1.1 MB/s | 595 kB 00:00 --------------------------------------------------------------------------------------------------------------- 合計 476 kB/s | 618 kB 00:01 トランザクションの確認を実行中 トランザクションの確認に成功しました。 トランザクションのテストを実行中 トランザクションのテストに成功しました。 トランザクションを実行中 準備 : 1/1 scriptletの実行中: smartmontools-selinux-1:7.3-2.fc36.noarch 1/2 インストール中 : smartmontools-selinux-1:7.3-2.fc36.noarch 1/2 scriptletの実行中: smartmontools-selinux-1:7.3-2.fc36.noarch 1/2 libsemanage.semanage_direct_install_info: Overriding smartmon module at lower priority 100 with module at priority 200. Failed to set unit properties on smartd.service: Unit smartd.service not found. インストール中 : smartmontools-1:7.3-2.fc36.x86_64 2/2 scriptletの実行中: smartmontools-1:7.3-2.fc36.x86_64 2/2 Created symlink /etc/systemd/system/multi-user.target.wants/smartd.service → /usr/lib/systemd/system/smartd.service. 検証 : smartmontools-1:7.3-2.fc36.x86_64 1/2 検証 : smartmontools-selinux-1:7.3-2.fc36.noarch 2/2 インストール済み: smartmontools-1:7.3-2.fc36.x86_64 smartmontools-selinux-1:7.3-2.fc36.noarch 完了しました!
$ sudo smartctl -a /dev/sda
$ sudo smartctl -a -d ata /dev/sda
$ sudo smartctl -a -d hpt,1/1/1 /dev/sdb
$ sudo parted -l
モデル: HPT DISK_2_0 (scsi) ディスク /dev/sdb: 128GB セクタサイズ (論理/物理): 512B/512B パーティションテーブル: msdos 番号 開始 終了 サイズ タイプ ファイルシステム フラグ 1 32.3kB 210MB 210MB primary ext3 boot 2 210MB 128GB 128GB primary lvm モデル: HPT DISK_2_1 (scsi) ディスク /dev/sdc: 2872GB セクタサイズ (論理/物理): 512B/512B パーティションテーブル: gpt 番号 開始 終了 サイズ ファイルシステム 名前 フラグ 1 17.4kB 2872GB 2872GB msftres モデル: Linux device-mapper (linear) (dm) ディスク /dev/mapper/vg_monster-lv_swap: 4295MB セクタサイズ (論理/物理): 512B/512B パーティションテーブル: loop 番号 開始 終了 サイズ ファイルシステム フラグ 1 0.00B 4295MB 4295MB linux-swap(v1) モデル: Linux device-mapper (linear) (dm) ディスク /dev/mapper/vg_monster-lv_root: 2996GB セクタサイズ (論理/物理): 512B/512B パーティションテーブル: loop 番号 開始 終了 サイズ ファイルシステム フラグ 1 0.00B 2996GB 2996GB ext4
RAIDカードのチャネル 物理ディスク アレイ Linuxデバイス
hpt チャネル1 ----> Disk1 --+
hpt チャネル2 ----> Disk2 | --> RAID5_0 --> /dev/sdb
hpt チャネル3 ----> Disk3 | --> RAID5_1 --> /dev/sdc
hpt チャネル4 ----> Disk4 --+
$ sudo smartctl -a -d hpt,1/1/1 /dev/sdb --> Disk1の情報を表示 $ sudo smartctl -a -d hpt,1/2/1 /dev/sdb --> Disk2の情報を表示 $ sudo smartctl -a -d hpt,1/3/1 /dev/sdb --> Disk3の情報を表示 $ sudo smartctl -a -d hpt,1/4/1 /dev/sdb --> Disk4の情報を表示
$ sudo smartctl -a -d hpt,1/1/1 /dev/sdc --> Disk1の情報を表示 $ sudo smartctl -a -d hpt,1/2/1 /dev/sdc --> Disk2の情報を表示 $ sudo smartctl -a -d hpt,1/3/1 /dev/sdc --> Disk3の情報を表示 $ sudo smartctl -a -d hpt,1/4/1 /dev/sdc --> Disk4の情報を表示
\\
[[http://smart.jinaka.com/information_list.html|smartmontoolsで取得できるSMART情報一覧]]\\
[[https://ja.wikipedia.org/wiki/Self-Monitoring,_Analysis_and_Reporting_Technology|Self-Monitoring, Analysis and Reporting Technology - Wikipedia]]\\
==== Vendor Specific SMART Attributes with Thresholds ====
注目すべき情報は、
^ ID# ^ ATTRIBUTE_NAME ^ 意味 ^
| 5|Reallocated_Sector_Ct|ハードディスクが読み・書き・検証エラーを見つけ、代替させた不良セクタ数。通常、代替セクタが発生しても気が付かないが、より多くのセクタが代替されるほど、ディスクの読み書きに影響を及ぼす。|
|196|Reallocated_Event_Count|不良セクタから予備領域にデータを移した回数。データ移行に失敗した数も成功した数と同様にカウントアップされる。|
|197|Current_Pending_Sector|不安定なセクタ数。代替セクタに再配置されるのを待っているセクタの総数で、正しく読み取りできたばあいは除かれる。但し、エラーが発生する場合は代替セクタに移されて、不良セクタはマークされる。この値がゼロで残るならば、対応する領域の質が低いことを示す。|
|198|Offline_Uncorrectable|修復できないセクタの読み書き時のエラーの量を示す。この値が増えることは、ディスクの欠陥・機械的なサブシステムに問題があることを示す。|
5 Reallocated_Sector_Ct 0x0033 248 248 063 Pre-fail Always - 55
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 3
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 178 177 063 Pre-fail Always - 15807
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 701
5 Reallocated_Sector_Ct 0x0033 248 248 063 Pre-fail Always - 55
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 253 249 187 Pre-fail Always - 55538
9 Power_On_Minutes 0x0032 245 245 000 Old_age Always - 659h+56m
10 Spin_Retry_Count 0x002b 253 230 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 252 252 000 Old_age Always - 713
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 28
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 2443
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 3
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 1
202 TA_Increase_Count 0x000a 253 245 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 234 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 249 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 190 190 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
$ sudo smartctl -d ata -a /dev/sda
smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Maxtor MaXLine Plus II
Device Model: Maxtor 7Y250M0
Serial Number: Y69A7TBE
Firmware Version: YAR51HW0
User Capacity: 251,000,193,024 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Wed Nov 12 21:51:41 2008 JST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 363) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 106) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 180 178 063 Pre-fail Always - 21971
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 623
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 251 247 187 Pre-fail Always - 39065
9 Power_On_Minutes 0x0032 247 247 000 Old_age Always - 229h+31m
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 252 252 000 Old_age Always - 675
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 31
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 1014
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 177 125 000 Old_age Offline - 74
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 0
202 TA_Increase_Count 0x000a 253 252 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 147 147 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 77 inconsistent with error log pointer 5
ATA Error Count: 77 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 77 occurred at disk power-on lifetime: 2026 hours (84 days + 10 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 52 cf fa e2 Error: ICRC, ABRT at LBA = 0x02facf52 = 49991506
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 58 52 cf fa e2 00 05:11:43.648 READ DMA
c8 00 40 92 ce fa e2 00 05:11:43.632 READ DMA
c8 00 40 4d a3 0e e0 00 05:11:43.632 READ DMA
c8 00 08 3a 1b f9 e2 00 05:11:43.632 READ DMA
c8 00 08 1a 1b f9 e2 00 05:11:43.616 READ DMA
Error 76 occurred at disk power-on lifetime: 439 hours (18 days + 7 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 e2 1f 39 ef Error: ICRC, ABRT at LBA = 0x0f391fe2 = 255401954
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 b0 e2 1f 39 ef 00 01:31:39.248 READ DMA
25 00 50 92 1e 39 e0 00 01:31:39.248 READ DMA EXT
25 00 30 92 16 39 e0 00 01:31:39.200 READ DMA EXT
c8 00 80 d2 0f 39 ef 00 01:31:39.184 READ DMA
25 00 18 92 0e 39 e0 00 01:31:39.184 READ DMA EXT
Error 75 occurred at disk power-on lifetime: 439 hours (18 days + 7 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 d8 62 1d 0d e0 Error: ICRC, ABRT 216 sectors at LBA = 0x000d1d62 = 859490
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
35 00 18 22 1d 0d e0 00 01:30:07.424 WRITE DMA EXT
ca 00 28 f2 1c 0d ed 00 01:30:07.424 WRITE DMA
ca 00 08 b2 90 ff ec 00 01:30:07.424 WRITE DMA
ca 00 18 6a e0 fe ec 00 01:30:07.424 WRITE DMA
ca 00 08 e2 5c fe ec 00 01:30:07.424 WRITE DMA
Error 74 occurred at disk power-on lifetime: 438 hours (18 days + 6 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 08 1a 2f f5 e2 Error: ICRC, ABRT at LBA = 0x02f52f1a = 49622810
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 1a 2f f5 e2 00 00:13:22.000 WRITE DMA
ca 00 08 0a 2f f5 e2 00 00:13:22.000 WRITE DMA
ca 00 10 d2 2e f5 e2 00 00:13:22.000 WRITE DMA
ca 00 18 a2 2e f5 e2 00 00:13:22.000 WRITE DMA
ca 00 10 8a 2e f5 e2 00 00:13:22.000 WRITE DMA
Error 73 occurred at disk power-on lifetime: 438 hours (18 days + 6 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 ca fb 27 ee Error: ICRC, ABRT at LBA = 0x0e27fbca = 237501386
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 18 ca fb 27 ee 00 00:09:08.752 READ DMA
c8 00 08 b2 fb 27 ee 00 00:09:08.752 READ DMA
c8 00 48 62 fb 27 ee 00 00:09:08.752 READ DMA
c8 00 30 22 fb 27 ee 00 00:09:08.752 READ DMA
c8 00 18 fa fa 27 ee 00 00:09:08.752 READ DMA
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
$ sudo smartctl -a /dev/sdc
smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Maxtor MaXLine Plus II
Device Model: Maxtor 7Y250P0
Serial Number: Y663ALAE
Firmware Version: YAR41BW0
User Capacity: 251,000,193,024 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Tue Jan 6 23:10:01 2009 JST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 363) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 107) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 178 177 063 Pre-fail Always - 15807
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 701
5 Reallocated_Sector_Ct 0x0033 248 248 063 Pre-fail Always - 55
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 253 249 187 Pre-fail Always - 55538
9 Power_On_Minutes 0x0032 245 245 000 Old_age Always - 659h+56m
10 Spin_Retry_Count 0x002b 253 230 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 252 252 000 Old_age Always - 713
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 28
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 2443
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 3
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 1
202 TA_Increase_Count 0x000a 253 245 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 234 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 249 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 190 190 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 758 inconsistent with error log pointer 5
ATA Error Count: 758 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 758 occurred at disk power-on lifetime: 2665 hours (111 days + 1 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 59 03 7b 03 31 e0 Error: UNC at LBA = 0x0031037b = 3212155
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
24 00 08 77 03 31 e0 0a 03:01:54.384 READ SECTOR(S) EXT
27 00 00 00 00 00 e0 08 03:01:54.384 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 0a 03:01:54.368 IDENTIFY DEVICE
ef 03 0c 00 00 00 a0 0a 03:01:54.368 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 03:01:54.368 READ NATIVE MAX ADDRESS EXT
Error 757 occurred at disk power-on lifetime: 2665 hours (111 days + 1 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 59 03 7b 03 31 e0 Error: UNC at LBA = 0x0031037b = 3212155
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
24 00 08 77 03 31 e0 0a 03:01:53.360 READ SECTOR(S) EXT
27 00 00 00 00 00 e0 08 03:01:53.344 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 0a 03:01:53.344 IDENTIFY DEVICE
ef 03 0c 00 00 00 a0 0a 03:01:53.344 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 03:01:53.344 READ NATIVE MAX ADDRESS EXT
Error 756 occurred at disk power-on lifetime: 2665 hours (111 days + 1 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 59 03 7b 03 31 e0 Error: UNC at LBA = 0x0031037b = 3212155
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
24 00 08 77 03 31 e0 0a 03:01:52.336 READ SECTOR(S) EXT
27 00 00 00 00 00 e0 08 03:01:52.320 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 0a 03:01:52.320 IDENTIFY DEVICE
ef 03 0c 00 00 00 a0 0a 03:01:52.320 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 03:01:52.320 READ NATIVE MAX ADDRESS EXT
Error 755 occurred at disk power-on lifetime: 2665 hours (111 days + 1 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 59 03 7b 03 31 e0 Error: UNC at LBA = 0x0031037b = 3212155
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
24 00 08 77 03 31 e0 0a 03:01:51.296 READ SECTOR(S) EXT
27 00 00 00 00 00 e0 08 03:01:51.296 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 0a 03:01:51.280 IDENTIFY DEVICE
ef 03 0c 00 00 00 a0 0a 03:01:51.280 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 03:01:51.280 READ NATIVE MAX ADDRESS EXT
Error 754 occurred at disk power-on lifetime: 2665 hours (111 days + 1 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 59 03 7b 03 31 e0 Error: UNC at LBA = 0x0031037b = 3212155
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
24 00 08 77 03 31 e0 0a 03:01:50.288 READ SECTOR(S) EXT
27 00 00 00 00 00 e0 08 03:01:50.272 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 0a 03:01:50.272 IDENTIFY DEVICE
ef 03 0c 00 00 00 a0 0a 03:01:50.272 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 03:01:50.272 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
$ sudo smartctl -l error /dev/sdc
smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Error Log Version: 1 Warning: ATA error count 758 inconsistent with error log pointer 5 ATA Error Count: 758 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 758 occurred at disk power-on lifetime: 2665 hours (111 days + 1 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 03 7b 03 31 e0 Error: UNC at LBA = 0x0031037b = 3212155 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 24 00 08 77 03 31 e0 0a 03:01:54.384 READ SECTOR(S) EXT 27 00 00 00 00 00 e0 08 03:01:54.384 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 0a 03:01:54.368 IDENTIFY DEVICE ef 03 0c 00 00 00 a0 0a 03:01:54.368 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 08 03:01:54.368 READ NATIVE MAX ADDRESS EXT Error 757 occurred at disk power-on lifetime: 2665 hours (111 days + 1 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 03 7b 03 31 e0 Error: UNC at LBA = 0x0031037b = 3212155 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 24 00 08 77 03 31 e0 0a 03:01:53.360 READ SECTOR(S) EXT 27 00 00 00 00 00 e0 08 03:01:53.344 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 0a 03:01:53.344 IDENTIFY DEVICE ef 03 0c 00 00 00 a0 0a 03:01:53.344 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 08 03:01:53.344 READ NATIVE MAX ADDRESS EXT Error 756 occurred at disk power-on lifetime: 2665 hours (111 days + 1 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 03 7b 03 31 e0 Error: UNC at LBA = 0x0031037b = 3212155 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 24 00 08 77 03 31 e0 0a 03:01:52.336 READ SECTOR(S) EXT 27 00 00 00 00 00 e0 08 03:01:52.320 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 0a 03:01:52.320 IDENTIFY DEVICE ef 03 0c 00 00 00 a0 0a 03:01:52.320 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 08 03:01:52.320 READ NATIVE MAX ADDRESS EXT Error 755 occurred at disk power-on lifetime: 2665 hours (111 days + 1 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 03 7b 03 31 e0 Error: UNC at LBA = 0x0031037b = 3212155 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 24 00 08 77 03 31 e0 0a 03:01:51.296 READ SECTOR(S) EXT 27 00 00 00 00 00 e0 08 03:01:51.296 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 0a 03:01:51.280 IDENTIFY DEVICE ef 03 0c 00 00 00 a0 0a 03:01:51.280 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 08 03:01:51.280 READ NATIVE MAX ADDRESS EXT Error 754 occurred at disk power-on lifetime: 2665 hours (111 days + 1 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 03 7b 03 31 e0 Error: UNC at LBA = 0x0031037b = 3212155 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 24 00 08 77 03 31 e0 0a 03:01:50.288 READ SECTOR(S) EXT 27 00 00 00 00 00 e0 08 03:01:50.272 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 0a 03:01:50.272 IDENTIFY DEVICE ef 03 0c 00 00 00 a0 0a 03:01:50.272 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 08 03:01:50.272 READ NATIVE MAX ADDRESS EXT