検索
以下に検索結果を表示します。
全文検索:
- dietpi @hardware:raspberry_pi
- e effect # - It is HIGHLY recommended to also set CONFIG_BOOT_WAIT_FOR_NETWORK=2, to force infinite wait f... ------------------------------------ ##### DietPi-Config settings ##### #---------------------------------... eractive | conservative | powersave | performance CONFIG_CPU_GOVERNOR=schedutil # Ondemand Sampling Rate | Min value: 10000 microseconds (10ms) CONFIG_CPU_ONDEMAND_SAMPLE_RATE=25000 # Ondemand Samplin
- managing_packages @hardware:gl-ar750s-ext
- nstall <pkgs> Install package(s) configure <pkgs> Configure unpacked package(s) remove <pkgs|regexp> Remove package(s) ... list-changed-conffiles List user modified configuration files files <pkg> List... <conf_file> Use <conf_file> as the opkg configuration file --conf <conf_file> --
- infineon_kit_40w_amp_hat_zw @hardware:raspberry_pi
- -i '/endmenu/d' /home/pi/linux/sound/soc/codecs/Kconfig ;\ echo "config SND_SOC_MA120X0P" >> /home/pi/linux/sound/soc/codecs/Kconfig ;\ echo " tristate \"Merus Audio Multilevel Clas... amplifier\"" >> /home/pi/linux/sound/soc/codecs/Kconfig ;\ echo " depends on I2C" >> /home/pi/linux/soun
- google_aiy_voice_kit @hardware:raspberry_pi
- るようにファイルシステム領域を拡張する ===== **Raspberry Pi Software Configuration Tool** を実行する。\\ <WRAP prewrap 100%> <code> $ sudo raspi-config </code> </WRAP> **[6 Advanced Options] -> [A1 Exp... RAP> <WRAP prewrap 100% #mincode> <code> Package configuration Samba server and utilities If your compu... > ===== WiFi の接続設定 ===== **Raspberry Pi Software Configuration Tool** を実行する。\\ <WRAP prewrap 100%> <code>
- zram_swap @hardware:raspberry_pi:dietpi
- Update_DietPi_Conf(){ G_CONFIG_INJECT 'AUTO_SETUP_SWAPFILE_SIZE=' "AUTO_SETUP_SW... Revert zram path to input value G_CONFIG_INJECT 'AUTO_SETUP_SWAPFILE_LOCATION=' "AUTO_SETU... ------- } </code></WRAP> </WRAP> ===== Zram-swap-config 編 ===== ==== git のインストール ==== <WRAP color_term> ... 724 kB in 5s (999 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selectin
- sdcard_overclock @hardware:raspberry_pi
- k ^^ WRITE(dd) ^^ READ(dd) ^^ HDPARM ^^ ^ CONFIG: force_turbo=1,core_freq=565,sd_overclock=125 (<w... | 15.46 MB/s || 45.62 MB/s || 45.52 MB/s || ^ CONFIG: force_turbo=1,sd_overclock=100 ^^^^^^^^^^ | 400... | 13.58 MB/s || 41.56 MB/s || 41.15 MB/s || ^ CONFIG: default ^^^^^^^^^^ | 400 | 0 | 50.000 MHz |... k ^^ WRITE(dd) ^^ READ(dd) ^^ HDPARM ^^ ^ CONFIG: default ^^^^^^^^^^ | 400 | 0 | 50.000 MHz |
- klevv_128gb_microsdxc_class10_uhs-i_u3_a1 @hardware:raspberry_pi:sdcard_overclock
- === <WRAP mincode_long><code> $ sudo ./sdbench.sh CONFIG: CLOCK : 50.000 MHz CORE : 400 MHz, turbo=0 DATA... ap em>NG\\ checksum error</wrap> | </WRAP> ==== config.txt の設定 (force_turbo=1,sd_overclock=100) ==== <WRAP mincode><code autoconf /boot/config.txt> $ sudo nano /boot/config.txt force_turbo=1 dtparam=sd_overclock=100 $ sudo reboot </code></WRAP>
- kioxia_exceria_128gb_microsdxc_class10_uhs-i_u1 @hardware:raspberry_pi:sdcard_overclock
- == <WRAP mincode_long><code> $ sudo ./sdbench.sh CONFIG: default CLOCK : SD Bus: 50.000 MHz, CPU: 1000.10... .400 MHz にダウンするので、**over_voltage=7** へ変更。\\ ==== config.txt の設定 (force_turbo=1,sd_overclock=100) ==== <WRAP mincode><code autoconf /boot/config.txt> $ sudo nano /boot/config.txt force_turbo=1 dtparam=sd_overclock=100 $ sudo reboot </code></WRAP>
- teamgroup_128gb_microsdxc_class10_uhs-i_u3_v30_a1 @hardware:raspberry_pi:sdcard_overclock
- === <WRAP mincode_long><code> $ sudo ./sdbench.sh CONFIG: CLOCK : 50.000 MHz CORE : 400 MHz, turbo=0 DATA... .760) | <wrap em>NG</wrap> | - | </WRAP> ==== config.txt の設定 (force_turbo=1,dtparam=sd_overclock=100) ==== <WRAP mincode><code autoconf /boot/config.txt> $ sudo nano /boot/config.txt force_turbo=1 dtparam=sd_overclock=100 $ sudo reboot </code></WRAP>
- toshiba_exceria_32gb_microsdhc_class10_uhs-i_u3 @hardware:raspberry_pi:sdcard_overclock
- == <WRAP mincode_long><code> $ sudo ./sdbench.sh CONFIG: default CLOCK : SD Bus: 50.000 MHz, CPU: 1000.00... =400/4.000) | **OK** | **OK** | </WRAP> ==== config.txt の設定 (force_turbo=1,sd_overclock=100) ==== <WRAP mincode><code autoconf /boot/config.txt> $ sudo nano /boot/config.txt force_turbo=1 dtparam=sd_overclock=100 $ sudo reboot </code></WRAP>
- samsung_evo_plus_128gb_microsdxc_uhs-i_u3 @hardware:raspberry_pi:sdcard_overclock
- === <WRAP mincode_long><code> $ sudo ./sdbench.sh CONFIG: CLOCK : 50.000 MHz CORE : 400 MHz, turbo=0 DATA... 90 (=450/5) | 90.000 | **OK** | </WRAP> ==== config.txt の設定 (core_freq=470, sd_overclock=94) ==== <WRAP mincode><code autoconf /boot/config.txt> $ sudo nano /boot/config.txt #----- Zero OC ----- ##fake_vsync_isr=1 ##framebuffer_swap=0 ##gpu_mem
- real-time_statistics @hardware:gl-ar750s-ext
- ckages/collectd-mod-network_5.8.0-5_mips_24kc.ipk Configuring collectd. Configuring librrd1. Configuring rrdtool1. Configuring collectd-mod-rrdtool. Configuring collectd-mod-iwinfo. Configuring collectd-mo
- sandisk_128gb_microsdxc_class10_uhs-i_u1_a1 @hardware:raspberry_pi:sdcard_overclock
- == <WRAP mincode_long><code> $ sudo ./sdbench.sh CONFIG: default CLOCK : SD Bus: 50.000 MHz, CPU: 1000.00... =500/5.000) | **OK** | **OK** | </WRAP> ==== config.txt の設定 (force_turbo=1,sd_overclock=100) ==== <WRAP mincode><code autoconf /boot/config.txt> $ sudo nano /boot/config.txt force_turbo=1 dtparam=sd_overclock=100 $ sudo reboot </code></WRAP>
- hidisc_128gb_microsdxc_class10_uhs-i_u1 @hardware:raspberry_pi:sdcard_overclock
- === <WRAP mincode_long><code> $ sudo ./sdbench.sh CONFIG: CLOCK : 50.000 MHz CORE : 400 MHz, turbo=0 DATA... lete! </code></WRAP> ===== オーバークロック後 ===== ==== config.txt の設定 (その1) ==== <WRAP mincode><code autoconf /boot/config.txt> $ sudo nano /boot/config.txt force_turbo=1 dtparam=sd_overclock=100 $ sudo reboot </code></WRAP>
- managing_firewall @hardware:gl-ar750s-ext
- x/ar71xx/packages/syslog-ng_3.9.1-3_mips_24kc.ipk Configuring syslog-ng. Configuring ulogd. Configuring ulogd-mod-extra. Configuring ulogd-mod-nfct. Configuring ulogd-mod-syslog. Configuring ulogd-mod-xml