検索
以下に検索結果を表示します。
全文検索:
- dietpi
- e effect # - It is HIGHLY recommended to also set CONFIG_BOOT_WAIT_FOR_NETWORK=2, to force infinite wait f... ------------------------------------ ##### DietPi-Config settings ##### #---------------------------------... eractive | conservative | powersave | performance CONFIG_CPU_GOVERNOR=schedutil # Ondemand Sampling Rate | Min value: 10000 microseconds (10ms) CONFIG_CPU_ONDEMAND_SAMPLE_RATE=25000 # Ondemand Samplin
- sdcard_overclock
- k ^^ WRITE(dd) ^^ READ(dd) ^^ HDPARM ^^ ^ CONFIG: force_turbo=1,core_freq=565,sd_overclock=125 (<w... | 15.46 MB/s || 45.62 MB/s || 45.52 MB/s || ^ CONFIG: force_turbo=1,sd_overclock=100 ^^^^^^^^^^ | 400... | 13.58 MB/s || 41.56 MB/s || 41.15 MB/s || ^ CONFIG: default ^^^^^^^^^^ | 400 | 0 | 50.000 MHz |... k ^^ WRITE(dd) ^^ READ(dd) ^^ HDPARM ^^ ^ CONFIG: default ^^^^^^^^^^ | 400 | 0 | 50.000 MHz |
- zram_swap @hardware:raspberry_pi:dietpi
- Update_DietPi_Conf(){ G_CONFIG_INJECT 'AUTO_SETUP_SWAPFILE_SIZE=' "AUTO_SETUP_SW... Revert zram path to input value G_CONFIG_INJECT 'AUTO_SETUP_SWAPFILE_LOCATION=' "AUTO_SETU... ------- } </code></WRAP> </WRAP> ===== Zram-swap-config 編 ===== ==== git のインストール ==== <WRAP color_term> ... 0.2-1) ... </code></WRAP> </WRAP> ==== Zram-swap-config のダウンロード ==== <WRAP color_term> <WRAP color_comman
- google_aiy_voice_kit
- を実行する。\\ <WRAP prewrap 100%> <code> $ sudo raspi-config </code> </WRAP> **[6 Advanced Options] -> [A1 Exp... を実行する。\\ <WRAP prewrap 100%> <code> $ sudo raspi-config </code> </WRAP> **[1 System Options]** -> **[S1 W... raspberrypi-sys-mods raspberrypi-ui-mods raspi-config rc-gui rp-bookshelf rp-prefapps rpd-plym-splash r... ve.raspberrypi.org/debian buster/main armhf raspi-config all 20201108 [27.8 kB] 取得:117 http://archive.rasp
- klevv_128gb_microsdxc_class10_uhs-i_u3_a1 @hardware:raspberry_pi:sdcard_overclock
- === <WRAP mincode_long><code> $ sudo ./sdbench.sh CONFIG: CLOCK : 50.000 MHz CORE : 400 MHz, turbo=0 DATA... ap em>NG\\ checksum error</wrap> | </WRAP> ==== config.txt の設定 (force_turbo=1,sd_overclock=100) ==== <WRAP mincode><code autoconf /boot/config.txt> $ sudo nano /boot/config.txt force_turbo=1 dtparam=sd_overclock=100 $ sudo reboot </code></WRAP>
- kioxia_exceria_128gb_microsdxc_class10_uhs-i_u1 @hardware:raspberry_pi:sdcard_overclock
- == <WRAP mincode_long><code> $ sudo ./sdbench.sh CONFIG: default CLOCK : SD Bus: 50.000 MHz, CPU: 1000.10... .400 MHz にダウンするので、**over_voltage=7** へ変更。\\ ==== config.txt の設定 (force_turbo=1,sd_overclock=100) ==== <WRAP mincode><code autoconf /boot/config.txt> $ sudo nano /boot/config.txt force_turbo=1 dtparam=sd_overclock=100 $ sudo reboot </code></WRAP>
- teamgroup_128gb_microsdxc_class10_uhs-i_u3_v30_a1 @hardware:raspberry_pi:sdcard_overclock
- === <WRAP mincode_long><code> $ sudo ./sdbench.sh CONFIG: CLOCK : 50.000 MHz CORE : 400 MHz, turbo=0 DATA... .760) | <wrap em>NG</wrap> | - | </WRAP> ==== config.txt の設定 (force_turbo=1,dtparam=sd_overclock=100) ==== <WRAP mincode><code autoconf /boot/config.txt> $ sudo nano /boot/config.txt force_turbo=1 dtparam=sd_overclock=100 $ sudo reboot </code></WRAP>
- toshiba_exceria_32gb_microsdhc_class10_uhs-i_u3 @hardware:raspberry_pi:sdcard_overclock
- == <WRAP mincode_long><code> $ sudo ./sdbench.sh CONFIG: default CLOCK : SD Bus: 50.000 MHz, CPU: 1000.00... =400/4.000) | **OK** | **OK** | </WRAP> ==== config.txt の設定 (force_turbo=1,sd_overclock=100) ==== <WRAP mincode><code autoconf /boot/config.txt> $ sudo nano /boot/config.txt force_turbo=1 dtparam=sd_overclock=100 $ sudo reboot </code></WRAP>
- samsung_evo_plus_128gb_microsdxc_uhs-i_u3 @hardware:raspberry_pi:sdcard_overclock
- === <WRAP mincode_long><code> $ sudo ./sdbench.sh CONFIG: CLOCK : 50.000 MHz CORE : 400 MHz, turbo=0 DATA... 90 (=450/5) | 90.000 | **OK** | </WRAP> ==== config.txt の設定 (core_freq=470, sd_overclock=94) ==== <WRAP mincode><code autoconf /boot/config.txt> $ sudo nano /boot/config.txt #----- Zero OC ----- ##fake_vsync_isr=1 ##framebuffer_swap=0 ##gpu_mem
- infineon_kit_40w_amp_hat_zw
- /home/pi/linux/sound/soc/codecs/Kconfig ;\ echo "config SND_SOC_MA120X0P" >> /home/pi/linux/sound/soc/cod... i/linux/sound/soc/codecs/Makefile ;\ echo "obj-\$(CONFIG_SND_SOC_MA120X0P) += snd-soc-ma120x0p.o" >> /ho... >> /home/pi/linux/sound/soc/bcm/Kconfig ;\ echo "config SND_BCM2708_SOC_MERUS_AMP" >> /home/pi/linux/soun... e/pi/linux/sound/soc/bcm/Makefile ;\ echo "obj-\$(CONFIG_SND_BCM2708_SOC_MERUS_AMP) += snd-soc-merus-amp.o
- sandisk_128gb_microsdxc_class10_uhs-i_u1_a1 @hardware:raspberry_pi:sdcard_overclock
- == <WRAP mincode_long><code> $ sudo ./sdbench.sh CONFIG: default CLOCK : SD Bus: 50.000 MHz, CPU: 1000.00... =500/5.000) | **OK** | **OK** | </WRAP> ==== config.txt の設定 (force_turbo=1,sd_overclock=100) ==== <WRAP mincode><code autoconf /boot/config.txt> $ sudo nano /boot/config.txt force_turbo=1 dtparam=sd_overclock=100 $ sudo reboot </code></WRAP>
- hidisc_128gb_microsdxc_class10_uhs-i_u1 @hardware:raspberry_pi:sdcard_overclock
- === <WRAP mincode_long><code> $ sudo ./sdbench.sh CONFIG: CLOCK : 50.000 MHz CORE : 400 MHz, turbo=0 DATA... lete! </code></WRAP> ===== オーバークロック後 ===== ==== config.txt の設定 (その1) ==== <WRAP mincode><code autoconf /boot/config.txt> $ sudo nano /boot/config.txt force_turbo=1 dtparam=sd_overclock=100 $ sudo reboot </code></WRAP>
- dietpi_native_pc_on_uefi_kvm @hardware:raspberry_pi:dietpi
- ora 383 k <b class=GRN>libvirt-daemon-config-nwfilter</b> x86_64 8.1.0-2.f... B/s | 413 kB 00:00 (8/19): libvirt-daemon-config-nwfilter-8.1.0-2.fc36.x86_64.rpm 2... txend-admin.socket. インストール中 : libvirt-daemon-config-nwfilter-8.1.0-2.fc36.x86_64 ... 7/19 scriptletの実行中: libvirt-daemon-config-nwfilter-8.1.0-2.fc36.x86_64
- adata_8gb_microsdhc_class10_uhs-i_u1 @hardware:raspberry_pi:sdcard_overclock
- s.sh </code></WRAP> ===== オーバークロック後 ===== ==== config.txt の設定 (その1) ==== <WRAP mincode><code autoconf /boot/config.txt> $ sudo nano /boot/config.txt force_turbo=1 dtparam=sd_overclock=100 $ sudo reboot </code></WRAP> ... udo ./microsd-benchmarks.sh </code></WRAP> ==== config.txt の設定 (その2) ==== <WRAP mincode><code autoconf /
- au_32gb_microsdhc_class10_uhs-i_u1 @hardware:raspberry_pi:sdcard_overclock
- s.sh </code></WRAP> ===== オーバークロック後 ===== ==== config.txt の設定 (その1) ==== <WRAP mincode><code autoconf /boot/config.txt> $ sudo nano /boot/config.txt force_turbo=1 dtparam=sd_overclock=100 $ sudo reboot </code></WRAP> ... udo ./microsd-benchmarks.sh </code></WRAP> ==== config.txt の設定 (その2) ==== <WRAP mincode><code autoconf /