hardware:raspberry_pi:dietpi:dietpi-imager [ともやん・どっと・ねっと]

この文書は読取専用です。文書のソースを閲覧することは可能ですが、変更はできません。もし変更したい場合は管理者に連絡してください。
====== DietPi での配布イメージの作成 (DietPi-Imager) ======

===== DietPi-Imager の実行 =====
<WRAP color_term>
<WRAP color_command><html><pre>
$ sudo bash -c "$(curl -sSfL https://raw.githubusercontent.com/MichaIng/DietPi/master/.build/images/dietpi-imager)"
</pre></html></WRAP>
<WRAP color_result><html><pre>
<b class=BoHIK>[ <b class=GRN> OK </b> ] DietPi-Imager | <b class=WHI>cd /home/dietpi</b>
[ <b class=WHI>INFO</b> ] DietPi-Imager | Checking for required APT packages: <b class=YEL>parted fdisk zerofree p7zip</b>
[ <b class=WHI>INFO</b> <b class=BoHIK>] DietPi-Imager |</b> <b class=WHI>APT update, please wait...</b>
Get:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease [15.0 kB]
Hit:2 https://archive.raspberrypi.org/debian bullseye InRelease
Get:3 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages [13.2 MB]
Get:4 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Contents (deb) [41.1 MB]
Fetched 54.3 MB in 2min 26s (373 kB/s)
Reading package lists...
[ <b class=GRN> OK </b> ] DietPi-Imager | <b class=WHI>APT update</b>
[ <b class=WHI>INFO</b> ] DietPi-Imager | <b class=WHI>APT install for: <b class=YEL>zerofree</b>, please wait...</b>
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
  zerofree
0 upgraded, 1 newly installed, 0 to remove and 9 not upgraded.
Need to get 8916 B of archives.
After this operation, 25.6 kB of additional disk space will be used.
Get:1 http://ftp.udx.icscoe.jp/Linux/raspbian/raspbian bullseye/main armhf zerofree armhf 1.1.1-1 [8916 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 8916 B in 1s (6362 B/s)
                               Selecting previously unselected package zerofree.
(Reading database ... 71135 files and directories currently installed.)
Preparing to unpack .../zerofree_1.1.1-1_armhf.deb ...
Unpacking zerofree (1.1.1-1) ...
Setting up zerofree (1.1.1-1) ...
[ <b class=GRN> OK </b> ] DietPi-Imager | <b class=WHI>APT install for:</b> <b class=YEL>zerofree</b></b>
</pre></html></WRAP>
</WRAP>

<WRAP color_term tblcell>
<WRAP color_command><html><pre>
</pre></html></WRAP>
<WRAP color_result><html><div class=BScBLU><pre style="font-family: 'HackGenNerd Console';font-size: 8px;zoom:70%;">
<b class=BScBLU>RPi Zero W (armv6l) | IP: 192.168.1.203












<div class=BScHGRY><b class="Bo"><b class="GRY">┌──────────────────────────────────────────────────┤ <b class=ScRED>DietPi-Imager</b> ├───────────────────────────────────────────────────┐
│ <b class=BLK>Please select how the input OS is stored:</b>                                                                            │
│                                                                                                                      │
│                                    <b class=BLK>Drive : The OS is stored on an attached drive.</b>                                    │
│                                    <b class=BScRED><b class=ScHGRY>Image : The OS is stored as an image file.</b></b>                                        │
│                                                                                                                      │
│                                                                                                                      │
│                                  <b class=BLK>&lt;Ok>                                      &lt;Cancel></b>                                  │
│                                                                                                                      │
└──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘</b></b></div>












</b>
</pre></div></html></WRAP>
</WRAP>

===== 起動用 SD 配布イメージ作成時に削除したい機密情報🤔 =====
起動用 SD をセッティングする時残る痕跡を調べる🤤\\
※機密情報が含まれる可能性があるものを整理してみます🤔\\

DietPi 公式起動イメージの初期設定(未起動)\\
<WRAP mincode><code autoconf /etc/network/interfaces>
# Location: /etc/network/interfaces
# Please modify network settings via: dietpi-config
# Or create your own drop-ins in: /etc/network/interfaces.d/

# Drop-in configs
source interfaces.d/*

# Ethernet
#allow-hotplug eth0
iface eth0 inet dhcp
address 192.168.0.100
netmask 255.255.255.0
gateway 192.168.0.1
#dns-nameservers 9.9.9.9 149.112.112.112

# WiFi
#allow-hotplug wlan0
iface wlan0 inet dhcp
address 192.168.0.100
netmask 255.255.255.0
gateway 192.168.0.1
#dns-nameservers 9.9.9.9 149.112.112.112
wireless-power off
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
</code></WRAP>

<WRAP mincode><code autoconf /etc/wpa_supplicant/wpa_supplicant.conf>
# Grant all members of group "netdev" permissions to configure WiFi, e.g. via wpa_cli or wpa_gui
ctrl_interface=DIR=/run/wpa_supplicant GROUP=netdev
# Allow wpa_cli/wpa_gui to overwrite this config file
update_config=1
</code></WRAP>

===== DietPi の初回起動処理を手動設定する場合 =====
**dietpi-firstboot.service** を有効化する🤤\\
<WRAP color_term>
<WRAP color_command><html><pre>
$ sudo systemctl enable dietpi-firstboot.service
</pre></html></WRAP>
<WRAP color_result><html><pre>
Created symlink /etc/systemd/system/multi-user.target.wants/dietpi-firstboot.service → /etc/systemd/system/dietpi-firstboot.service.
</pre></html></WRAP>
</WRAP>

この時、**/boot/dietpi-wifi.txt** のパスワードが暗号化処理されて **/var/lib/dietpi/dietpi-wifi.db** が生成されるので **dietpi-wifi.txt** を用意しておく😉\\
<wrap em>※dietpi-wifi.txt は初回起動で処理されたら削除されて消える🤔</wrap>\\
<WRAP mincode_long><code autoconf /boot/dietpi-wifi.txt>
#---------------------------------------------------------------
# Entry 0
# - WiFi SSID: required, case sensitive
aWIFI_SSID[0]=''
# - WiFi key: If no key/open, leave this blank
aWIFI_KEY[0]=''
# - Key type: NONE (no key/open) | WPA-PSK | WEP | WPA-EAP (then use settings below)
aWIFI_KEYMGR[0]='WPA-PSK'
# - WPA-EAP options: Only fill if WPA-EAP is set above
aWIFI_PROTO[0]=''
aWIFI_PAIRWISE[0]=''
aWIFI_AUTH_ALG[0]=''
aWIFI_EAP[0]=''
aWIFI_IDENTITY[0]=''
aWIFI_PASSWORD[0]=''
aWIFI_PHASE1[0]=''
aWIFI_PHASE2[0]=''
# - Path to the certificate file, e.g.: /boot/mycert.cer
aWIFI_CERT[0]=''
#---------------------------------------------------------------
# Entry 1
# - WiFi SSID: required, case sensitive
aWIFI_SSID[1]=''
# - WiFi key: If no key/open, leave this blank
aWIFI_KEY[1]=''
# - Key type: NONE (no key/open) | WPA-PSK | WEP | WPA-EAP (then use settings below)
aWIFI_KEYMGR[1]='WPA-PSK'
# - WPA-EAP options: Only fill if WPA-EAP is set above
aWIFI_PROTO[1]=''
aWIFI_PAIRWISE[1]=''
aWIFI_AUTH_ALG[1]=''
aWIFI_EAP[1]=''
aWIFI_IDENTITY[1]=''
aWIFI_PASSWORD[1]=''
aWIFI_PHASE1[1]=''
aWIFI_PHASE2[1]=''
# - Path to the certificate file, e.g.: /boot/mycert.cer
aWIFI_CERT[1]=''
#---------------------------------------------------------------
# Entry 2
# - WiFi SSID: required, case sensitive
aWIFI_SSID[2]=''
# - WiFi key: If no key/open, leave this blank
aWIFI_KEY[2]=''
# - Key type: NONE (no key/open) | WPA-PSK | WEP | WPA-EAP (then use settings below)
aWIFI_KEYMGR[2]='WPA-PSK'
# - WPA-EAP options: Only fill if WPA-EAP is set above
aWIFI_PROTO[2]=''
aWIFI_PAIRWISE[2]=''
aWIFI_AUTH_ALG[2]=''
aWIFI_EAP[2]=''
aWIFI_IDENTITY[2]=''
aWIFI_PASSWORD[2]=''
aWIFI_PHASE1[2]=''
aWIFI_PHASE2[2]=''
# - Path to the certificate file, e.g.: /boot/mycert.cer
aWIFI_CERT[2]=''
#---------------------------------------------------------------
# Entry 3
# - WiFi SSID: required, case sensitive
aWIFI_SSID[3]=''
# - WiFi key: If no key/open, leave this blank
aWIFI_KEY[3]=''
# - Key type: NONE (no key/open) | WPA-PSK | WEP | WPA-EAP (then use settings below)
aWIFI_KEYMGR[3]='WPA-PSK'
# - WPA-EAP options: Only fill if WPA-EAP is set above
aWIFI_PROTO[3]=''
aWIFI_PAIRWISE[3]=''
aWIFI_AUTH_ALG[3]=''
aWIFI_EAP[3]=''
aWIFI_IDENTITY[3]=''
aWIFI_PASSWORD[3]=''
aWIFI_PHASE1[3]=''
aWIFI_PHASE2[3]=''
# - Path to the certificate file, e.g.: /boot/mycert.cer
aWIFI_CERT[3]=''
#---------------------------------------------------------------
# Entry 4
# - WiFi SSID: required, case sensitive
aWIFI_SSID[4]=''
# - WiFi key: If no key/open, leave this blank
aWIFI_KEY[4]=''
# - Key type: NONE (no key/open) | WPA-PSK | WEP | WPA-EAP (then use settings below)
aWIFI_KEYMGR[4]='WPA-PSK'
# - WPA-EAP options: Only fill if WPA-EAP is set above
aWIFI_PROTO[4]=''
aWIFI_PAIRWISE[4]=''
aWIFI_AUTH_ALG[4]=''
aWIFI_EAP[4]=''
aWIFI_IDENTITY[4]=''
aWIFI_PASSWORD[4]=''
aWIFI_PHASE1[4]=''
aWIFI_PHASE2[4]=''
# - Path to the certificate file, e.g.: /boot/mycert.cer
aWIFI_CERT[4]=''
</code></WRAP>

初回起動の場合は **dietpi-wifi.db** は存在しなくて良い🤔\\
<WRAP color_term>
<WRAP color_command><html><pre>
$ sudo rm /var/lib/dietpi/dietpi-wifi.db
</pre></html></WRAP>
</WRAP>