hardware:raspberry_pi:lm-sensors

差分

このページの2つのバージョン間の差分を表示します。

この比較画面へのリンク

次のリビジョン		 前のリビジョン
hardware:raspberry_pi:lm-sensors [2020/12/15 07:30] – 作成 ともやんhardware:raspberry_pi:lm-sensors [2020/12/15 07:49] (現在) – [sensorsコマンドで表示] ともやん
行 138: 行 138:
 Raspberry Pi Zero WH 以外では低電圧センサーの低電圧状態が返る❓ 確認できていません。\\ Raspberry Pi Zero WH 以外では低電圧センサーの低電圧状態が返る❓ 確認できていません。\\
 [[https://patchwork.kernel.org/project/linux-arm-kernel/patch/1526477827-10859-4-git-send-email-stefan.wahren@i2se.com/|[RFC,3/6] hwmon: Add support for RPi voltage sensor - Patchwork]]\\ [[https://patchwork.kernel.org/project/linux-arm-kernel/patch/1526477827-10859-4-git-send-email-stefan.wahren@i2se.com/|[RFC,3/6] hwmon: Add support for RPi voltage sensor - Patchwork]]\\
 +[[https://github.com/raspberrypi/linux/issues/2367|Under-voltage messages in the kernel log? · Issue #2367 · raspberrypi/linux · GitHub]]\\
 +
 [[https://www.raspberrypi.org/documentation/hardware/raspberrypi/power/README.md|Power Supply - Raspberry Pi Documentation]]\\ [[https://www.raspberrypi.org/documentation/hardware/raspberrypi/power/README.md|Power Supply - Raspberry Pi Documentation]]\\
 +
 +<WRAP prewrap 100% #mincode>
 <code> <code>
 Power Supply Warnings Power Supply Warnings
行 144: 行 148:
 On all models of Raspberry Pi since the Raspberry Pi B+ (2014) except the Zero range, there is low-voltage detection circuitry that will detect if the supply voltage drops below 4.63V (+/- 5%). This will result in a warning icon being displayed on all attached displays and an entry being added to the kernel log. On all models of Raspberry Pi since the Raspberry Pi B+ (2014) except the Zero range, there is low-voltage detection circuitry that will detect if the supply voltage drops below 4.63V (+/- 5%). This will result in a warning icon being displayed on all attached displays and an entry being added to the kernel log.
 </code> </code>
 +</WRAP>
  
  • hardware/raspberry_pi/lm-sensors.1607985020.txt.gz
  • 最終更新: 2020/12/15 07:30
  • by ともやん