差分

このページの2つのバージョン間の差分を表示します。

--- python:supervisor [2023/03/13 07:52] – [Supervisord の設定] ともやん
+++ python:supervisor [2023/03/15 06:03] (現在) – [☢️古い資料です☢️] ともやん
@@ 行 55: / 行 55: @@
 </pre></html></WRAP>
 <WRAP color_result><html><pre>
-<b class=GRN>●</b> supervisord.service - Process Monitoring and Control Daemon
+<b class=HIG>●</b> supervisord.service - Process Monitoring and Control Daemon
-     Loaded: loaded (/usr/lib/systemd/system/supervisord.service; <b class=GRN>enabled</b>; preset: <b class=HIY>disabled</b>)
+     Loaded: loaded (<a href="file://WICKED-BEAT/usr/lib/systemd/system/supervisord.service">/usr/lib/systemd/system/supervisord.service</a>; <b class=HIG>enabled</b>; preset: <b class="BOLD" style="color:#d7d75f;">disabled</b>)
-     Active: <b class=GRN>active (running)</b> since Mon 2023-03-13 06:34:05 JST; 6s ago
+     Active: <b class=HIG>active (running)</b> since Mon 2023-03-13 06:34:05 JST; 6s ago
-    Process: 21987 ExecStart=/usr/bin/supervisord -c /etc/supervisord.conf (code=exited, status=0/SUCCESS)
+    Process: 107602 ExecStart=/usr/bin/supervisord -c /etc/supervisord.conf (code=exited, status=0/SUCCESS)
-   Main PID: 21989 (supervisord)
+   Main PID: 107605 (supervisord)
       Tasks: 1 (limit: 19013)
      Memory: 23.5M
         CPU: 515ms
      CGroup: /system.slice/supervisord.service
-             └─21989 /usr/bin/python3 /usr/bin/supervisord -c /etc/supervisord.conf
+             └─<b style="color:#8a8a8a;">21989 /usr/bin/python3 /usr/bin/supervisord -c /etc/supervisord.conf</b>
 月 13 06:34:04 WICKED-BEAT systemd[1]: Starting supervisord.service - Process Monitoring and Control Daemon...
@@ 行 86: / 行 86: @@
 </code>
 </WRAP>
-===== 自動起動設定 =====
-<code>
-$ sudo systemctl enable supervisord.service
-</code>
 ===== Supervisord の設定 =====
-<code>
+<WRAP color_term>
-$ sudo vi /etc/supervisord.conf
+<WRAP color_command><html><pre>
-</code>
+<b class=GRN>$</b> <b class=HIY>sudo</b> nano /etc/supervisord.conf
-<code ini>
+</pre></html></WRAP>
+</WRAP>
+デフォルトでは UNIX ドメインソケットの設定になっているので...🤔\\
+<WRAP color_term>
+<WRAP color_mincode><code ini>
+[unix_http_server]
+file=/run/supervisor/supervisor.sock   ; (the path to the socket file)
+;chmod=0700                 ; sockef file mode (default 0700)
+;chown=nobody:nogroup       ; socket file uid:gid owner
+;username=user              ; (default is no username (open server))
+;password=123               ; (default is no password (open server))
+;[inet_http_server]         ; inet (TCP) server disabled by default
+;port=127.0.0.1:9001        ; (ip_address:port specifier, *:port for all iface)
+;username=user              ; (default is no username (open server))
+;password=123               ; (default is no password (open server))
+</code></WRAP>
+</WRAP>
+[[http://localhost:9001|]] で使える設定に変更する🤔\\
+<WRAP color_term>
+<WRAP color_mincode><code ini>
 ;[unix_http_server]
-;file=/var/run/supervisor/supervisor.sock   ; (the path to the socket file)
+;file=/run/supervisor/supervisor.sock   ; (the path to the socket file)
+;chmod=0700                 ; sockef file mode (default 0700)
+;chown=nobody:nogroup       ; socket file uid:gid owner
+;username=user              ; (default is no username (open server))
+;password=123               ; (default is no password (open server))
 [inet_http_server]         ; inet (TCP) server disabled by default
 port=127.0.0.1:9001        ; (ip_address:port specifier, *:port for all iface)
-</code>
+;username=user              ; (default is no username (open server))
+;password=123               ; (default is no password (open server))
+</code></WRAP>
+</WRAP>
+<WRAP color_term>
+<WRAP color_command><html><pre>
+<b class=GRN>$</b> <b class=HIY>sudo</b> systemctl restart supervisord
+<b class=GRN>$</b> <b class=HIY>systemctl</b> status supervisord
+</pre></html></WRAP>
+<WRAP color_command><html><pre>
+<b class=HIG>●</b> supervisord.service - Process Monitoring and Control Daemon
+     Loaded: loaded (<a href="file://WICKED-BEAT/usr/lib/systemd/system/supervisord.service">/usr/lib/systemd/system/supervisord.service</a>; <b class=HIG>enabled</b>; preset: <b class="BOLD" style="color:#d7d75f;">disabled</b>)
+     Active: <b class=HIG>active (running)</b> since Wed 2023-03-15 04:46:56 JST; 7min ago
+    Process: 107602 ExecStart=/usr/bin/supervisord -c /etc/supervisord.conf (code=exited, status=0/SUCCESS)
+   Main PID: 107605 (supervisord)
+      Tasks: 1 (limit: 19013)
+     Memory: 21.9M
+        CPU: 536ms
+     CGroup: /system.slice/supervisord.service
+             └─<b style="color:#8a8a8a;">107605 /usr/bin/python3 /usr/bin/supervisord -c /etc/supervisord.conf</b>
+月 15 04:46:55 WICKED-BEAT systemd[1]: Starting supervisord.service - Process Monitoring and Control Daemon...
+月 15 04:46:56 WICKED-BEAT systemd[1]: Started supervisord.service - Process Monitoring and Control Daemon.
+</pre></html></WRAP>
+</WRAP>
+[[http://localhost:9001|]] にアクセスして動作確認😉\\
+{{:python:supervisord_http_server_001.png|supervisord http server}}\\
 ===== 付録 =====
+==== 標準パッケージの内容 ====
 Fedora 標準パッケージでインストールされるファイルの一覧は以下の内容です🤔\\
 <WRAP color_term>
@@ 行 386: / 行 436: @@
 </WRAP>
-====== 古い資料です ======
+==== supervisord.service ====
+<WRAP color_term>
+<WRAP color_command><html><pre>
+<b class=GRN>$</b> <b class=HIY>cat</b> /usr/lib/systemd/system/supervisord.service
+</pre></html></WRAP>
+<WRAP color_mincode><code autoconf /usr/lib/systemd/system/supervisord.service>
+[Unit]
+Description=Process Monitoring and Control Daemon
+After=rc-local.service
+[Service]
+Type=forking
+ExecStart=/usr/bin/supervisord -c /etc/supervisord.conf
+RuntimeDirectory=supervisor
+RuntimeDirectoryMode=755
+[Install]
+WantedBy=multi-user.target
+</code></WRAP>
+</WRAP>
+==== supervisord.conf ====
+<WRAP color_term>
+<WRAP color_command><html><pre>
+<b class=GRN>$</b> <b class=HIY>cat</b> /etc/supervisord.conf
+</pre></html></WRAP>
+<WRAP color_mincode_long><code ini /etc/supervisord.conf>
+; Sample supervisor config file.
+[unix_http_server]
+file=/run/supervisor/supervisor.sock   ; (the path to the socket file)
+;chmod=0700                 ; sockef file mode (default 0700)
+;chown=nobody:nogroup       ; socket file uid:gid owner
+;username=user              ; (default is no username (open server))
+;password=123               ; (default is no password (open server))
+;[inet_http_server]         ; inet (TCP) server disabled by default
+;port=127.0.0.1:9001        ; (ip_address:port specifier, *:port for all iface)
+;username=user              ; (default is no username (open server))
+;password=123               ; (default is no password (open server))
+[supervisord]
+logfile=/var/log/supervisor/supervisord.log  ; (main log file;default $CWD/supervisord.log)
+logfile_maxbytes=50MB       ; (max main logfile bytes b4 rotation;default 50MB)
+logfile_backups=10          ; (num of main logfile rotation backups;default 10)
+loglevel=info               ; (log level;default info; others: debug,warn,trace)
+pidfile=/run/supervisord.pid ; (supervisord pidfile;default supervisord.pid)
+nodaemon=false              ; (start in foreground if true;default false)
+minfds=1024                 ; (min. avail startup file descriptors;default 1024)
+minprocs=200                ; (min. avail process descriptors;default 200)
+;umask=022                  ; (process file creation umask;default 022)
+;user=chrism                 ; (default is current user, required if root)
+;identifier=supervisor       ; (supervisord identifier, default is 'supervisor')
+;directory=/tmp              ; (default is not to cd during start)
+;nocleanup=true              ; (don't clean up tempfiles at start;default false)
+;childlogdir=/tmp            ; ('AUTO' child log dir, default $TEMP)
+;environment=KEY=value       ; (key value pairs to add to environment)
+;strip_ansi=false            ; (strip ansi escape codes in logs; def. false)
+; the below section must remain in the config file for RPC
+; (supervisorctl/web interface) to work, additional interfaces may be
+; added by defining them in separate rpcinterface: sections
+[rpcinterface:supervisor]
+supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface
+[supervisorctl]
+serverurl=unix:///run/supervisor/supervisor.sock ; use a unix:// URL  for a unix socket
+;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket
+;username=chris              ; should be same as http_username if set
+;password=123                ; should be same as http_password if set
+;prompt=mysupervisor         ; cmd line prompt (default "supervisor")
+;history_file=~/.sc_history  ; use readline history if available
+; The below sample program section shows all possible program subsection values,
+; create one or more 'real' program: sections to be able to control them under
+; supervisor.
+;[program:theprogramname]
+;command=/bin/cat              ; the program (relative uses PATH, can take args)
+;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
+;numprocs=1                    ; number of processes copies to start (def 1)
+;directory=/tmp                ; directory to cwd to before exec (def no cwd)
+;umask=022                     ; umask for process (default None)
+;priority=999                  ; the relative start priority (default 999)
+;autostart=true                ; start at supervisord start (default: true)
+;autorestart=true              ; retstart at unexpected quit (default: true)
+;startsecs=10                  ; number of secs prog must stay running (def. 1)
+;startretries=3                ; max # of serial start failures (default 3)
+;exitcodes=0,2                 ; 'expected' exit codes for process (default 0,2)
+;stopsignal=QUIT               ; signal used to kill process (default TERM)
+;stopwaitsecs=10               ; max num secs to wait b4 SIGKILL (default 10)
+;user=chrism                   ; setuid to this UNIX account to run the program
+;redirect_stderr=true          ; redirect proc stderr to stdout (default false)
+;stdout_logfile=/a/path        ; stdout log path, NONE for none; default AUTO
+;stdout_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
+;stdout_logfile_backups=10     ; # of stdout logfile backups (default 10)
+;stdout_capture_maxbytes=1MB   ; number of bytes in 'capturemode' (default 0)
+;stdout_events_enabled=false   ; emit events on stdout writes (default false)
+;stderr_logfile=/a/path        ; stderr log path, NONE for none; default AUTO
+;stderr_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
+;stderr_logfile_backups=10     ; # of stderr logfile backups (default 10)
+;stderr_capture_maxbytes=1MB   ; number of bytes in 'capturemode' (default 0)
+;stderr_events_enabled=false   ; emit events on stderr writes (default false)
+;environment=A=1,B=2           ; process environment additions (def no adds)
+;serverurl=AUTO                ; override serverurl computation (childutils)
+; The below sample eventlistener section shows all possible
+; eventlistener subsection values, create one or more 'real'
+; eventlistener: sections to be able to handle event notifications
+; sent by supervisor.
+;[eventlistener:theeventlistenername]
+;command=/bin/eventlistener    ; the program (relative uses PATH, can take args)
+;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
+;numprocs=1                    ; number of processes copies to start (def 1)
+;events=EVENT                  ; event notif. types to subscribe to (req'd)
+;buffer_size=10                ; event buffer queue size (default 10)
+;directory=/tmp                ; directory to cwd to before exec (def no cwd)
+;umask=022                     ; umask for process (default None)
+;priority=-1                   ; the relative start priority (default -1)
+;autostart=true                ; start at supervisord start (default: true)
+;autorestart=unexpected        ; restart at unexpected quit (default: unexpected)
+;startsecs=10                  ; number of secs prog must stay running (def. 1)
+;startretries=3                ; max # of serial start failures (default 3)
+;exitcodes=0,2                 ; 'expected' exit codes for process (default 0,2)
+;stopsignal=QUIT               ; signal used to kill process (default TERM)
+;stopwaitsecs=10               ; max num secs to wait b4 SIGKILL (default 10)
+;user=chrism                   ; setuid to this UNIX account to run the program
+;redirect_stderr=true          ; redirect proc stderr to stdout (default false)
+;stdout_logfile=/a/path        ; stdout log path, NONE for none; default AUTO
+;stdout_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
+;stdout_logfile_backups=10     ; # of stdout logfile backups (default 10)
+;stdout_events_enabled=false   ; emit events on stdout writes (default false)
+;stderr_logfile=/a/path        ; stderr log path, NONE for none; default AUTO
+;stderr_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
+;stderr_logfile_backups        ; # of stderr logfile backups (default 10)
+;stderr_events_enabled=false   ; emit events on stderr writes (default false)
+;environment=A=1,B=2           ; process environment additions
+;serverurl=AUTO                ; override serverurl computation (childutils)
+; The below sample group section shows all possible group values,
+; create one or more 'real' group: sections to create "heterogeneous"
+; process groups.
+;[group:thegroupname]
+;programs=progname1,progname2  ; each refers to 'x' in [program:x] definitions
+;priority=999                  ; the relative start priority (default 999)
+; The [include] section can just contain the "files" setting.  This
+; setting can list multiple files (separated by whitespace or
+; newlines).  It can also contain wildcards.  The filenames are
+; interpreted as relative to this file.  Included files *cannot*
+; include files themselves.
+[include]
+files = supervisord.d/*.ini
+</code></WRAP>
+</WRAP>
+====== ☢️古い資料です (Obsolete)☢️ ======
 ===== パッケージ インストール =====
 <code>