差分
このページの2つのバージョン間の差分を表示します。
| 両方とも前のリビジョン 前のリビジョン 次のリビジョン | 前のリビジョン | ||
| hardware:amd_opteron_dual [2019/05/18 02:23] – 外部編集 非ログインユーザー | hardware:amd_opteron_dual [2021/07/05 02:01] (現在) – ともやん | ||
|---|---|---|---|
| 行 1: | 行 1: | ||
| - | <ifauth !@loggedinusers>< | + | ====== 自作3号機 AMD Opteron 248 2.2GHz Dual, メモリ 4GB, RAID5 3TB ====== |
| - | <script async src="// | + | 2005年4月制作の Linux 64bit Dual AMD Opteron |
| - | < | + | |
| - | | + | 当時は 64bit の Linux OS で最新の技術をガンガン試すために Fedora Core 3 を導入した。\\ |
| - | google_ad_client: | + | その後、Fedora Core 4, 5, 6、Fedora 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 とアップグレードし現在に至る。\\ |
| - | enable_page_level_ads: | + | |
| - | }); | + | {{: |
| - | </ | + | |
| - | ===== 自作3号機 AMD Opteron 248 2.2GHz Dual, メモリ 4GB, RAID5 3TB ===== | + | ===== RIOWORKS(Arima) HDAMB ===== |
| - | 製作当初(2005年4月)のスペック\\ | + | BIOS SETUP に入るには、起動時に F2 キーを押す。\\ |
| - | \\ | + | |
| - | AMD Opteron | + | ===== 不定期メンテナンス ===== |
| - | OS: Fedora Core 3 x86_64\\ | + | |
| - | \\ | + | ==== 2020/ |
| - | 当時は 64bit の Linux OS で最新の技術をガンガン試すために Fedora Core 3 を導入した。\\ | + | {{hardware: |
| - | その後、Fedora Core 4, 5, 6、Fedora 7, 8, 9, 10, 11, 12, 13 とアップグレードし現在に至る。\\ | + | {{hardware: |
| - | \\ | + | {{hardware: |
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | {{hardware: | ||
| + | |||
| + | ==== S.M.A.R.T 情報 ==== | ||
| + | <WRAP prewrap mintbl> | ||
| + | ^ device | ||
| + | ^ 総書込量 (ホスト)[ID#: | ||
| + | ^ 電源投入回数[ID#: | ||
| + | ^ 使用時間[ID#: | ||
| + | </ | ||
| + | < | ||
| + | $ sudo smartctl -a -d hpt,1/1/1 /dev/sdb | ||
| + | </ | ||
| + | <WRAP prewrap 100% # | ||
| + | < | ||
| + | smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.4.2-1.fc16.x86_64] (local build) | ||
| + | Copyright (C) 2002-12 by Bruce Allen, http:// | ||
| + | |||
| + | === START OF INFORMATION SECTION === | ||
| + | Model Family: | ||
| + | Device Model: | ||
| + | Serial Number: | ||
| + | LU WWN Device Id: 5 000c50 01139774f | ||
| + | Firmware Version: SD15 | ||
| + | User Capacity: | ||
| + | Sector Size: 512 bytes logical/ | ||
| + | Device is: In smartctl database [for details use: -P show] | ||
| + | ATA Version is: 8 | ||
| + | ATA Standard is: ATA-8-ACS revision 4 | ||
| + | Local Time is: Sat Aug 15 07:13:03 2020 JST | ||
| + | |||
| + | ==> WARNING: There are known problems with these drives, | ||
| + | see the following Seagate web pages: | ||
| + | http:// | ||
| + | http:// | ||
| + | http:// | ||
| + | |||
| + | SMART support is: Available - device has SMART capability. | ||
| + | SMART support is: Enabled | ||
| + | |||
| + | === START OF READ SMART DATA SECTION === | ||
| + | SMART overall-health self-assessment test result: PASSED | ||
| + | |||
| + | General SMART Values: | ||
| + | Offline data collection status: | ||
| + | was completed without error. | ||
| + | Auto Offline Data Collection: Enabled. | ||
| + | Self-test execution status: | ||
| + | without error or no self-test has ever | ||
| + | been run. | ||
| + | Total time to complete Offline | ||
| + | data collection: | ||
| + | Offline data collection | ||
| + | capabilities: | ||
| + | Auto Offline data collection on/off support. | ||
| + | Suspend Offline collection upon new | ||
| + | command. | ||
| + | Offline surface scan supported. | ||
| + | Self-test supported. | ||
| + | Conveyance Self-test supported. | ||
| + | Selective Self-test supported. | ||
| + | SMART capabilities: | ||
| + | power-saving mode. | ||
| + | Supports SMART auto save timer. | ||
| + | Error logging capability: | ||
| + | General Purpose Logging supported. | ||
| + | Short self-test routine | ||
| + | recommended polling time: ( 1) minutes. | ||
| + | Extended self-test routine | ||
| + | recommended polling time: ( 204) minutes. | ||
| + | Conveyance self-test routine | ||
| + | recommended polling time: ( 2) minutes. | ||
| + | SCT capabilities: | ||
| + | SCT Error Recovery Control supported. | ||
| + | SCT Feature Control supported. | ||
| + | SCT Data Table supported. | ||
| + | |||
| + | SMART Attributes Data Structure revision number: 10 | ||
| + | Vendor Specific SMART Attributes with Thresholds: | ||
| + | ID# ATTRIBUTE_NAME | ||
| + | 1 Raw_Read_Error_Rate | ||
| + | 3 Spin_Up_Time | ||
| + | 4 Start_Stop_Count | ||
| + | 5 Reallocated_Sector_Ct | ||
| + | 7 Seek_Error_Rate | ||
| + | 9 Power_On_Hours | ||
| + | 10 Spin_Retry_Count | ||
| + | 12 Power_Cycle_Count | ||
| + | 184 End-to-End_Error | ||
| + | 187 Reported_Uncorrect | ||
| + | 188 Command_Timeout | ||
| + | 189 High_Fly_Writes | ||
| + | 190 Airflow_Temperature_Cel 0x0022 | ||
| + | 194 Temperature_Celsius | ||
| + | 195 Hardware_ECC_Recovered | ||
| + | 197 Current_Pending_Sector | ||
| + | 198 Offline_Uncorrectable | ||
| + | 199 UDMA_CRC_Error_Count | ||
| + | |||
| + | SMART Error Log Version: 1 | ||
| + | No Errors Logged | ||
| + | |||
| + | SMART Self-test log structure revision number 1 | ||
| + | Num Test_Description | ||
| + | # 1 Short offline | ||
| + | # 2 Short offline | ||
| + | # 3 Short offline | ||
| + | # 4 Extended offline | ||
| + | # 5 Short offline | ||
| + | |||
| + | SMART Selective self-test log data structure revision number 1 | ||
| + | | ||
| + | 1 0 0 Not_testing | ||
| + | 2 0 0 Not_testing | ||
| + | 3 0 0 Not_testing | ||
| + | 4 0 0 Not_testing | ||
| + | 5 0 0 Not_testing | ||
| + | Selective self-test flags (0x0): | ||
| + | After scanning selected spans, do NOT read-scan remainder of disk. | ||
| + | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
| + | </ | ||
| + | </ | ||
| + | |||
| + | <WRAP prewrap mintbl> | ||
| + | ^ device | ||
| + | ^ 総書込量 (ホスト)[ID#: | ||
| + | ^ 電源投入回数[ID#: | ||
| + | ^ 使用時間[ID#: | ||
| + | </ | ||
| + | < | ||
| + | $ sudo smartctl -a -d hpt,1/2/1 /dev/sdb | ||
| + | </ | ||
| + | <WRAP prewrap 100% # | ||
| + | < | ||
| + | smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.4.2-1.fc16.x86_64] (local build) | ||
| + | Copyright (C) 2002-12 by Bruce Allen, http:// | ||
| + | |||
| + | === START OF INFORMATION SECTION === | ||
| + | Model Family: | ||
| + | Device Model: | ||
| + | Serial Number: | ||
| + | LU WWN Device Id: 5 000c50 0113fbdd9 | ||
| + | Firmware Version: SD15 | ||
| + | User Capacity: | ||
| + | Sector Size: 512 bytes logical/ | ||
| + | Device is: In smartctl database [for details use: -P show] | ||
| + | ATA Version is: 8 | ||
| + | ATA Standard is: ATA-8-ACS revision 4 | ||
| + | Local Time is: Sat Aug 15 07:19:17 2020 JST | ||
| + | |||
| + | ==> WARNING: There are known problems with these drives, | ||
| + | see the following Seagate web pages: | ||
| + | http:// | ||
| + | http:// | ||
| + | http:// | ||
| + | |||
| + | SMART support is: Available - device has SMART capability. | ||
| + | SMART support is: Enabled | ||
| + | |||
| + | === START OF READ SMART DATA SECTION === | ||
| + | SMART overall-health self-assessment test result: PASSED | ||
| + | |||
| + | General SMART Values: | ||
| + | Offline data collection status: | ||
| + | was completed without error. | ||
| + | Auto Offline Data Collection: Enabled. | ||
| + | Self-test execution status: | ||
| + | without error or no self-test has ever | ||
| + | been run. | ||
| + | Total time to complete Offline | ||
| + | data collection: | ||
| + | Offline data collection | ||
| + | capabilities: | ||
| + | Auto Offline data collection on/off support. | ||
| + | Suspend Offline collection upon new | ||
| + | command. | ||
| + | Offline surface scan supported. | ||
| + | Self-test supported. | ||
| + | Conveyance Self-test supported. | ||
| + | Selective Self-test supported. | ||
| + | SMART capabilities: | ||
| + | power-saving mode. | ||
| + | Supports SMART auto save timer. | ||
| + | Error logging capability: | ||
| + | General Purpose Logging supported. | ||
| + | Short self-test routine | ||
| + | recommended polling time: ( 1) minutes. | ||
| + | Extended self-test routine | ||
| + | recommended polling time: ( 207) minutes. | ||
| + | Conveyance self-test routine | ||
| + | recommended polling time: ( 2) minutes. | ||
| + | SCT capabilities: | ||
| + | SCT Error Recovery Control supported. | ||
| + | SCT Feature Control supported. | ||
| + | SCT Data Table supported. | ||
| + | |||
| + | SMART Attributes Data Structure revision number: 10 | ||
| + | Vendor Specific SMART Attributes with Thresholds: | ||
| + | ID# ATTRIBUTE_NAME | ||
| + | 1 Raw_Read_Error_Rate | ||
| + | 3 Spin_Up_Time | ||
| + | 4 Start_Stop_Count | ||
| + | 5 Reallocated_Sector_Ct | ||
| + | 7 Seek_Error_Rate | ||
| + | 9 Power_On_Hours | ||
| + | 10 Spin_Retry_Count | ||
| + | 12 Power_Cycle_Count | ||
| + | 184 End-to-End_Error | ||
| + | 187 Reported_Uncorrect | ||
| + | 188 Command_Timeout | ||
| + | 189 High_Fly_Writes | ||
| + | 190 Airflow_Temperature_Cel 0x0022 | ||
| + | 194 Temperature_Celsius | ||
| + | 195 Hardware_ECC_Recovered | ||
| + | 197 Current_Pending_Sector | ||
| + | 198 Offline_Uncorrectable | ||
| + | 199 UDMA_CRC_Error_Count | ||
| + | |||
| + | SMART Error Log Version: 1 | ||
| + | No Errors Logged | ||
| + | |||
| + | SMART Self-test log structure revision number 1 | ||
| + | Num Test_Description | ||
| + | # 1 Short offline | ||
| + | # 2 Short offline | ||
| + | # 3 Extended offline | ||
| + | # 4 Short offline | ||
| + | |||
| + | SMART Selective self-test log data structure revision number 1 | ||
| + | | ||
| + | 1 0 0 Not_testing | ||
| + | 2 0 0 Not_testing | ||
| + | 3 0 0 Not_testing | ||
| + | 4 0 0 Not_testing | ||
| + | 5 0 0 Not_testing | ||
| + | Selective self-test flags (0x0): | ||
| + | After scanning selected spans, do NOT read-scan remainder of disk. | ||
| + | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
| + | </ | ||
| + | </ | ||
| + | |||
| + | <WRAP prewrap mintbl> | ||
| + | ^ device | ||
| + | ^ 総書込量 (ホスト)[ID#: | ||
| + | ^ 電源投入回数[ID#: | ||
| + | ^ 使用時間[ID#: | ||
| + | </ | ||
| + | < | ||
| + | $ sudo smartctl -a -d hpt,1/3/1 /dev/sdb | ||
| + | </ | ||
| + | <WRAP prewrap 100% # | ||
| + | < | ||
| + | smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.4.2-1.fc16.x86_64] (local build) | ||
| + | Copyright (C) 2002-12 by Bruce Allen, http:// | ||
| + | |||
| + | === START OF INFORMATION SECTION === | ||
| + | Model Family: | ||
| + | Device Model: | ||
| + | Serial Number: | ||
| + | LU WWN Device Id: 5 000c50 0113ac150 | ||
| + | Firmware Version: SD15 | ||
| + | User Capacity: | ||
| + | Sector Size: 512 bytes logical/ | ||
| + | Device is: In smartctl database [for details use: -P show] | ||
| + | ATA Version is: 8 | ||
| + | ATA Standard is: ATA-8-ACS revision 4 | ||
| + | Local Time is: Sat Aug 15 07:19:57 2020 JST | ||
| + | |||
| + | ==> WARNING: There are known problems with these drives, | ||
| + | see the following Seagate web pages: | ||
| + | http:// | ||
| + | http:// | ||
| + | http:// | ||
| + | |||
| + | SMART support is: Available - device has SMART capability. | ||
| + | SMART support is: Enabled | ||
| + | |||
| + | === START OF READ SMART DATA SECTION === | ||
| + | SMART overall-health self-assessment test result: PASSED | ||
| + | |||
| + | General SMART Values: | ||
| + | Offline data collection status: | ||
| + | was completed without error. | ||
| + | Auto Offline Data Collection: Enabled. | ||
| + | Self-test execution status: | ||
| + | without error or no self-test has ever | ||
| + | been run. | ||
| + | Total time to complete Offline | ||
| + | data collection: | ||
| + | Offline data collection | ||
| + | capabilities: | ||
| + | Auto Offline data collection on/off support. | ||
| + | Suspend Offline collection upon new | ||
| + | command. | ||
| + | Offline surface scan supported. | ||
| + | Self-test supported. | ||
| + | Conveyance Self-test supported. | ||
| + | Selective Self-test supported. | ||
| + | SMART capabilities: | ||
| + | power-saving mode. | ||
| + | Supports SMART auto save timer. | ||
| + | Error logging capability: | ||
| + | General Purpose Logging supported. | ||
| + | Short self-test routine | ||
| + | recommended polling time: ( 1) minutes. | ||
| + | Extended self-test routine | ||
| + | recommended polling time: ( 206) minutes. | ||
| + | Conveyance self-test routine | ||
| + | recommended polling time: ( 2) minutes. | ||
| + | SCT capabilities: | ||
| + | SCT Error Recovery Control supported. | ||
| + | SCT Feature Control supported. | ||
| + | SCT Data Table supported. | ||
| + | |||
| + | SMART Attributes Data Structure revision number: 10 | ||
| + | Vendor Specific SMART Attributes with Thresholds: | ||
| + | ID# ATTRIBUTE_NAME | ||
| + | 1 Raw_Read_Error_Rate | ||
| + | 3 Spin_Up_Time | ||
| + | 4 Start_Stop_Count | ||
| + | 5 Reallocated_Sector_Ct | ||
| + | 7 Seek_Error_Rate | ||
| + | 9 Power_On_Hours | ||
| + | 10 Spin_Retry_Count | ||
| + | 12 Power_Cycle_Count | ||
| + | 184 End-to-End_Error | ||
| + | 187 Reported_Uncorrect | ||
| + | 188 Command_Timeout | ||
| + | 189 High_Fly_Writes | ||
| + | 190 Airflow_Temperature_Cel 0x0022 | ||
| + | 194 Temperature_Celsius | ||
| + | 195 Hardware_ECC_Recovered | ||
| + | 197 Current_Pending_Sector | ||
| + | 198 Offline_Uncorrectable | ||
| + | 199 UDMA_CRC_Error_Count | ||
| + | |||
| + | SMART Error Log Version: 1 | ||
| + | No Errors Logged | ||
| + | |||
| + | SMART Self-test log structure revision number 1 | ||
| + | Num Test_Description | ||
| + | # 1 Short offline | ||
| + | # 2 Short offline | ||
| + | # 3 Extended offline | ||
| + | # 4 Short offline | ||
| + | |||
| + | SMART Selective self-test log data structure revision number 1 | ||
| + | | ||
| + | 1 0 0 Not_testing | ||
| + | 2 0 0 Not_testing | ||
| + | 3 0 0 Not_testing | ||
| + | 4 0 0 Not_testing | ||
| + | 5 0 0 Not_testing | ||
| + | Selective self-test flags (0x0): | ||
| + | After scanning selected spans, do NOT read-scan remainder of disk. | ||
| + | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
| + | </ | ||
| + | </ | ||
| + | |||
| + | <WRAP prewrap mintbl> | ||
| + | ^ device | ||
| + | ^ 総書込量 (ホスト)[ID#: | ||
| + | ^ 電源投入回数[ID#: | ||
| + | ^ 使用時間[ID#: | ||
| + | </ | ||
| + | < | ||
| + | $ sudo smartctl -a -d hpt,1/4/1 /dev/sdb | ||
| + | </ | ||
| + | <WRAP prewrap 100% # | ||
| + | < | ||
| + | smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.4.2-1.fc16.x86_64] (local build) | ||
| + | Copyright (C) 2002-12 by Bruce Allen, http:// | ||
| + | |||
| + | === START OF INFORMATION SECTION === | ||
| + | Model Family: | ||
| + | Device Model: | ||
| + | Serial Number: | ||
| + | LU WWN Device Id: 5 000c50 01a029c81 | ||
| + | Firmware Version: CC44 | ||
| + | User Capacity: | ||
| + | Sector Size: 512 bytes logical/ | ||
| + | Device is: In smartctl database [for details use: -P show] | ||
| + | ATA Version is: 8 | ||
| + | ATA Standard is: ATA-8-ACS revision 4 | ||
| + | Local Time is: Sat Aug 15 07:20:29 2020 JST | ||
| + | SMART support is: Available - device has SMART capability. | ||
| + | SMART support is: Enabled | ||
| + | |||
| + | === START OF READ SMART DATA SECTION === | ||
| + | SMART overall-health self-assessment test result: PASSED | ||
| + | |||
| + | General SMART Values: | ||
| + | Offline data collection status: | ||
| + | was completed without error. | ||
| + | Auto Offline Data Collection: Enabled. | ||
| + | Self-test execution status: | ||
| + | without error or no self-test has ever | ||
| + | been run. | ||
| + | Total time to complete Offline | ||
| + | data collection: | ||
| + | Offline data collection | ||
| + | capabilities: | ||
| + | Auto Offline data collection on/off support. | ||
| + | Suspend Offline collection upon new | ||
| + | command. | ||
| + | Offline surface scan supported. | ||
| + | Self-test supported. | ||
| + | Conveyance Self-test supported. | ||
| + | Selective Self-test supported. | ||
| + | SMART capabilities: | ||
| + | power-saving mode. | ||
| + | Supports SMART auto save timer. | ||
| + | Error logging capability: | ||
| + | General Purpose Logging supported. | ||
| + | Short self-test routine | ||
| + | recommended polling time: ( 1) minutes. | ||
| + | Extended self-test routine | ||
| + | recommended polling time: ( 198) minutes. | ||
| + | Conveyance self-test routine | ||
| + | recommended polling time: ( 2) minutes. | ||
| + | SCT capabilities: | ||
| + | SCT Error Recovery Control supported. | ||
| + | SCT Feature Control supported. | ||
| + | SCT Data Table supported. | ||
| + | |||
| + | SMART Attributes Data Structure revision number: 10 | ||
| + | Vendor Specific SMART Attributes with Thresholds: | ||
| + | ID# ATTRIBUTE_NAME | ||
| + | 1 Raw_Read_Error_Rate | ||
| + | 3 Spin_Up_Time | ||
| + | 4 Start_Stop_Count | ||
| + | 5 Reallocated_Sector_Ct | ||
| + | 7 Seek_Error_Rate | ||
| + | 9 Power_On_Hours | ||
| + | 10 Spin_Retry_Count | ||
| + | 12 Power_Cycle_Count | ||
| + | 183 Runtime_Bad_Block | ||
| + | 184 End-to-End_Error | ||
| + | 187 Reported_Uncorrect | ||
| + | 188 Command_Timeout | ||
| + | 189 High_Fly_Writes | ||
| + | 190 Airflow_Temperature_Cel 0x0022 | ||
| + | 194 Temperature_Celsius | ||
| + | 195 Hardware_ECC_Recovered | ||
| + | 197 Current_Pending_Sector | ||
| + | 198 Offline_Uncorrectable | ||
| + | 199 UDMA_CRC_Error_Count | ||
| + | 240 Head_Flying_Hours | ||
| + | 241 Total_LBAs_Written | ||
| + | 242 Total_LBAs_Read | ||
| + | |||
| + | SMART Error Log Version: 1 | ||
| + | No Errors Logged | ||
| + | |||
| + | SMART Self-test log structure revision number 1 | ||
| + | Num Test_Description | ||
| + | # 1 Short offline | ||
| + | # 2 Short offline | ||
| + | |||
| + | SMART Selective self-test log data structure revision number 1 | ||
| + | | ||
| + | 1 0 0 Not_testing | ||
| + | 2 0 0 Not_testing | ||
| + | 3 0 0 Not_testing | ||
| + | 4 0 0 Not_testing | ||
| + | 5 0 0 Not_testing | ||
| + | Selective self-test flags (0x0): | ||
| + | After scanning selected spans, do NOT read-scan remainder of disk. | ||
| + | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
| + | </ | ||
| + | </ | ||
| + | |||
| + | ===== 製作当初(2005年4月)のスペック ===== | ||
| + | AMD Opteron 248 2.2GHz Dual, メモリ 2GB, RAID0 1TB\\ | ||
| + | OS: Fedora Core 3 x86_64\\ | ||
| ^ カテゴリ | ^ カテゴリ | ||
| |CPU |Opteron 248 BOX 2.2GHz, | |CPU |Opteron 248 BOX 2.2GHz, | ||
| 行 30: | 行 579: | ||
| |Total | |Total | ||
| - | 後で増設または付け替えたもの。 | + | 後で増設または付け替えたもの。 |
| ^ カテゴリ | ^ カテゴリ | ||
| |Memory|SuperTalent PC2700 DDR333 Registered ECC 2GB| 8, | |Memory|SuperTalent PC2700 DDR333 Registered ECC 2GB| 8, | ||
| |RAID |HighPoint RocketRAID 1740 | 13, | |RAID |HighPoint RocketRAID 1740 | 13, | ||
| |HDD |Barracuda 7200.11 1TB SATA 3Gb/s 32MB 7200RPM | |HDD |Barracuda 7200.11 1TB SATA 3Gb/s 32MB 7200RPM | ||
| + | |VGA |HIS Radion 4870 H467QS1GHA AGP 1GB | 不明| | ||
| |Total | |Total | ||
| - | 実はメモリ速度はスペックダウン。体感速度は変わらないが容量が倍になる分の恩恵の方が大きい。\\ | + | 実はメモリ速度はスペックダウン。体感速度は変わらないが容量が倍になる分の恩恵の方が大きい。\\ |
| - | ディスク回りはRAID5化で信頼性重視。IOPが無いタイプなのでCPUに負荷は掛かる。\\ | + | ディスク回りはRAID5化で信頼性重視。IOPが無いタイプなのでCPUに負荷は掛かる。\\ |