adb - Android Debug Bridge

Android Debug Bridge version 1.0.41
Version 34.0.4-android-tools
Installed as /usr/bin/adb
Running on Linux 6.8.5-201.fc39.x86_64 (x86_64)

global options:
 -a                       listen on all network interfaces, not just localhost
 -d                       use USB device (error if multiple devices connected)
 -e                       use TCP/IP device (error if multiple TCP/IP devices available)
 -s SERIAL                use device with given serial (overrides $ANDROID_SERIAL)
 -t ID                    use device with given transport id
 -H                       name of adb server host [default=localhost]
 -P                       port of adb server [default=5037]
 -L SOCKET                listen on given socket for adb server [default=tcp:localhost:5037]
 --one-device SERIAL|USB  only allowed with 'start-server' or 'server nodaemon', server will only connect to one USB device, specified by a serial number or USB device address.
 --exit-on-write-error    exit if stdout is closed

general commands:
 devices [-l]             list connected devices (-l for long output)
 help                     show this help message
 version                  show version num

networking:
 connect HOST[:PORT]      connect to a device via TCP/IP [default port=5555]
 disconnect [HOST[:PORT]]
     disconnect from given TCP/IP device [default port=5555], or all
 pair HOST[:PORT] [PAIRING CODE]
     pair with a device for secure TCP/IP communication
 forward --list           list all forward socket connections
 forward [--no-rebind] LOCAL REMOTE
     forward socket connection using:
       tcp:<port> (<local> may be "tcp:0" to pick any open port)
       localabstract:<unix domain socket name>
       localreserved:<unix domain socket name>
       localfilesystem:<unix domain socket name>
       dev:<character device name>
       jdwp:<process pid> (remote only)
       vsock:<CID>:<port> (remote only)
       acceptfd:<fd> (listen only)
 forward --remove LOCAL   remove specific forward socket connection
 forward --remove-all     remove all forward socket connections
 reverse --list           list all reverse socket connections from device
 reverse [--no-rebind] REMOTE LOCAL
     reverse socket connection using:
       tcp:<port> (<remote> may be "tcp:0" to pick any open port)
       localabstract:<unix domain socket name>
       localreserved:<unix domain socket name>
       localfilesystem:<unix domain socket name>
 reverse --remove REMOTE  remove specific reverse socket connection
 reverse --remove-all     remove all reverse socket connections from device
 mdns check               check if mdns discovery is available
 mdns services            list all discovered services

file transfer:
 push [--sync] [-z ALGORITHM] [-Z] LOCAL... REMOTE
     copy local files/directories to device
     --sync: only push files that are newer on the host than the device
     -n: dry run: push files to device without storing to the filesystem
     -z: enable compression with a specified algorithm (any/none/brotli/lz4/zstd)
     -Z: disable compression
 pull [-a] [-z ALGORITHM] [-Z] REMOTE... LOCAL
     copy files/dirs from device
     -a: preserve file timestamp and mode
     -z: enable compression with a specified algorithm (any/none/brotli/lz4/zstd)
     -Z: disable compression
 sync [-l] [-z ALGORITHM] [-Z] [all|data|odm|oem|product|system|system_ext|vendor]
     sync a local build from $ANDROID_PRODUCT_OUT to the device (default all)
     -n: dry run: push files to device without storing to the filesystem
     -l: list files that would be copied, but don't copy them
     -z: enable compression with a specified algorithm (any/none/brotli/lz4/zstd)
     -Z: disable compression

shell:
 shell [-e ESCAPE] [-n] [-Tt] [-x] [COMMAND...]
     run remote shell command (interactive shell if no command given)
     -e: choose escape character, or "none"; default '~'
     -n: don't read from stdin
     -T: disable pty allocation
     -t: allocate a pty if on a tty (-tt: force pty allocation)
     -x: disable remote exit codes and stdout/stderr separation
 emu COMMAND              run emulator console command

app installation (see also `adb shell cmd package help`):
 install [-lrtsdg] [--instant] PACKAGE
     push a single package to the device and install it
 install-multiple [-lrtsdpg] [--instant] PACKAGE...
     push multiple APKs to the device for a single package and install them
 install-multi-package [-lrtsdpg] [--instant] PACKAGE...
     push one or more packages to the device and install them atomically
     -r: replace existing application
     -t: allow test packages
     -d: allow version code downgrade (debuggable packages only)
     -p: partial application install (install-multiple only)
     -g: grant all runtime permissions
     --abi ABI: override platform's default ABI
     --instant: cause the app to be installed as an ephemeral install app
     --no-streaming: always push APK to device and invoke Package Manager as separate steps
     --streaming: force streaming APK directly into Package Manager
     --fastdeploy: use fast deploy
     --no-fastdeploy: prevent use of fast deploy
     --force-agent: force update of deployment agent when using fast deploy
     --date-check-agent: update deployment agent when local version is newer and using fast deploy
     --version-check-agent: update deployment agent when local version has different version code and using fast deploy
     --local-agent: locate agent files from local source build (instead of SDK location)
     (See also `adb shell pm help` for more options.)
 uninstall [-k] PACKAGE
     remove this app package from the device
     '-k': keep the data and cache directories

debugging:
 bugreport [PATH]
     write bugreport to given PATH [default=bugreport.zip];
     if PATH is a directory, the bug report is saved in that directory.
     devices that don't support zipped bug reports output to stdout.
 jdwp                     list pids of processes hosting a JDWP transport
 logcat                   show device log (logcat --help for more)

security:
 disable-verity           disable dm-verity checking on userdebug builds
 enable-verity            re-enable dm-verity checking on userdebug builds
 keygen FILE
     generate adb public/private key; private key stored in FILE,

scripting:
 wait-for[-TRANSPORT]-STATE...
     wait for device to be in a given state
     STATE: device, recovery, rescue, sideload, bootloader, or disconnect
     TRANSPORT: usb, local, or any [default=any]
 get-state                print offline | bootloader | device
 get-serialno             print <serial-number>
 get-devpath              print <device-path>
 remount [-R]
      remount partitions read-write. if a reboot is required, -R will
      will automatically reboot the device.
 reboot [bootloader|recovery|sideload|sideload-auto-reboot]
     reboot the device; defaults to booting system image but
     supports bootloader and recovery too. sideload reboots
     into recovery and automatically starts sideload mode,
     sideload-auto-reboot is the same but reboots after sideloading.
 sideload OTAPACKAGE      sideload the given full OTA package
 root                     restart adbd with root permissions
 unroot                   restart adbd without root permissions
 usb                      restart adbd listening on USB
 tcpip PORT               restart adbd listening on TCP on PORT

internal debugging:
 start-server             ensure that there is a server running
 kill-server              kill the server if it is running
 reconnect                kick connection from host side to force reconnect
 reconnect device         kick connection from device side to force reconnect
 reconnect offline        reset offline/unauthorized devices to force reconnect

usb:
 attach                   attach a detached USB device
 detach                   detach from a USB device to allow use by other processes
environment variables:
 $ADB_TRACE
     comma-separated list of debug info to log:
     all,adb,sockets,packets,rwx,usb,sync,sysdeps,transport,jdwp
 $ADB_VENDOR_KEYS         colon-separated list of keys (files or directories)
 $ANDROID_SERIAL          serial number to connect to (see -s)
 $ANDROID_LOG_TAGS        tags to be used by logcat (see logcat --help)
 $ADB_LOCAL_TRANSPORT_MAX_PORT max emulator scan port (default 5585, 16 emus)
 $ADB_MDNS_AUTO_CONNECT   comma-separated list of mdns services to allow auto-connect (default adb-tls-connect)

Online documentation: https://android.googlesource.com/platform/packages/modules/adb/+/refs/heads/master/docs/user/adb.1.md

usage: pm list packages [-f] [-d] [-e] [-s] [-3] [-i] [-u] [--user USER_ID] [FILTER]
       pm list permission-groups
       pm list permissions [-g] [-f] [-d] [-u] [GROUP]
       pm list instrumentation [-f] [TARGET-PACKAGE]
       pm list features
       pm list libraries
       pm list users
       pm path PACKAGE
       pm dump PACKAGE
       pm install [-lrtsfd] [-i PACKAGE] [--user USER_ID] [PATH]
       pm install-create [-lrtsfdp] [-i PACKAGE] [-S BYTES]
               [--install-location 0/1/2]
               [--force-uuid internal|UUID]
       pm install-write [-S BYTES] SESSION_ID SPLIT_NAME [PATH]
       pm install-commit SESSION_ID
       pm install-abandon SESSION_ID
       pm uninstall [-k] [--user USER_ID] PACKAGE
       pm set-installer PACKAGE INSTALLER
       pm move-package PACKAGE [internal|UUID]
       pm move-primary-storage [internal|UUID]
       pm clear [--user USER_ID] PACKAGE
       pm enable [--user USER_ID] PACKAGE_OR_COMPONENT
       pm disable [--user USER_ID] PACKAGE_OR_COMPONENT
       pm disable-user [--user USER_ID] PACKAGE_OR_COMPONENT
       pm disable-until-used [--user USER_ID] PACKAGE_OR_COMPONENT
       pm hide [--user USER_ID] PACKAGE_OR_COMPONENT
       pm unhide [--user USER_ID] PACKAGE_OR_COMPONENT
       pm grant [--user USER_ID] PACKAGE PERMISSION
       pm revoke [--user USER_ID] PACKAGE PERMISSION
       pm reset-permissions
       pm set-app-link [--user USER_ID] PACKAGE {always|ask|never|undefined}
       pm get-app-link [--user USER_ID] PACKAGE
       pm set-install-location [0/auto] [1/internal] [2/external]
       pm get-install-location
       pm set-permission-enforced PERMISSION [true|false]
       pm trim-caches DESIRED_FREE_SPACE [internal|UUID]
       pm create-user [--profileOf USER_ID] [--managed] USER_NAME
       pm remove-user USER_ID
       pm get-max-users

pm list packages: prints all packages, optionally only
  those whose package name contains the text in FILTER.  Options:
    -f: see their associated file.
    -d: filter to only show disbled packages.
    -e: filter to only show enabled packages.
    -s: filter to only show system packages.
    -3: filter to only show third party packages.
    -i: see the installer for the packages.
    -u: also include uninstalled packages.

pm list permission-groups: prints all known permission groups.

pm list permissions: prints all known permissions, optionally only
  those in GROUP.  Options:
    -g: organize by group.
    -f: print all information.
    -s: short summary.
    -d: only list dangerous permissions.
    -u: list only the permissions users will see.

pm list instrumentation: use to list all test packages; optionally
  supply  to list the test packages for a particular
  application.  Options:
    -f: list the .apk file for the test package.

pm list features: prints all features of the system.

pm list users: prints all users on the system.

pm path: print the path to the .apk of the given PACKAGE.

pm dump: print system state associated with the given PACKAGE.

pm install: install a single legacy package
pm install-create: create an install session
    -l: forward lock application
    -r: replace existing application
    -t: allow test packages
    -i: specify the installer package name
    -s: install application on sdcard
    -f: install application on internal flash
    -d: allow version code downgrade
    -p: partial application install
    -g: grant all runtime permissions
    -S: size in bytes of entire session

pm install-write: write a package into existing session; path may
  be '-' to read from stdin
    -S: size in bytes of package, required for stdin

pm install-commit: perform install of fully staged session
pm install-abandon: abandon session

pm set-installer: set installer package name

pm uninstall: removes a package from the system. Options:
    -k: keep the data and cache directories around after package removal.

pm clear: deletes all data associated with a package.

pm enable, disable, disable-user, disable-until-used: these commands
  change the enabled state of a given package or component (written
  as "package/class").

pm grant, revoke: these commands either grant or revoke permissions
    to apps. The permissions must be declared as used in the app's
    manifest, be runtime permissions (protection level dangerous),
    and the app targeting SDK greater than Lollipop MR1.

pm reset-permissions: revert all runtime permissions to their default state.

pm get-install-location: returns the current install location.
    0 [auto]: Let system decide the best location
    1 [internal]: Install on internal device storage
    2 [external]: Install on external media

pm set-install-location: changes the default install location.
  NOTE: this is only intended for debugging; using this can cause
  applications to break and other undersireable behavior.
    0 [auto]: Let system decide the best location
    1 [internal]: Install on internal device storage
    2 [external]: Install on external media

pm trim-caches: trim cache files to reach the given free space.

pm create-user: create a new user with the given USER_NAME,
  printing the new user identifier of the user.

pm remove-user: remove the user with the given USER_IDENTIFIER,
  deleting all data associated with that user

package:android
package:android.autoinstalls.config.asus.pai
package:com.android.backupconfirm
package:com.android.bluetooth
package:com.android.bluetoothmidiservice
package:com.android.bookmarkprovider
package:com.android.calllogbackup
package:com.android.captiveportallogin
package:com.android.carrierconfig
package:com.android.cellbroadcastreceiver
package:com.android.certinstaller
package:com.android.chrome
package:com.android.defcontainer
package:com.android.documentsui
package:com.android.dreams.basic
package:com.android.externalstorage
package:com.android.galaxy4
package:com.android.htmlviewer
package:com.android.inputdevices
package:com.android.keychain
package:com.android.location.fused
package:com.android.managedprovisioning
package:com.android.mms.service
package:com.android.noisefield
package:com.android.packageinstaller
package:com.android.pacprocessor
package:com.android.phasebeam
package:com.android.phone
package:com.android.printspooler
package:com.android.providers.calendar
package:com.android.providers.contacts
package:com.android.providers.downloads
package:com.android.providers.downloads.ui
package:com.android.providers.media
package:com.android.providers.partnerbookmarks
package:com.android.providers.settings
package:com.android.providers.telephony
package:com.android.providers.userdictionary
package:com.android.proxyhandler
package:com.android.server.telecom
package:com.android.settings
package:com.android.sharedstoragebackup
package:com.android.shell
package:com.android.smspush
package:com.android.statementservice
package:com.android.stk
package:com.android.systemui
package:com.android.vending
package:com.android.vpndialogs
package:com.android.wallpaper
package:com.android.wallpaper.holospiral
package:com.android.wallpaper.livepicker
package:com.android.wallpapercropper
package:com.asus.DLNA
package:com.asus.UpdateLauncher
package:com.asus.appinstallationservice
package:com.asus.appmanager
package:com.asus.as
package:com.asus.asusincallui
package:com.asus.asuszenuipcsuite
package:com.asus.atd.smmitest
package:com.asus.backuprestore
package:com.asus.boostdozemodeservice
package:com.asus.browser
package:com.asus.calculator
package:com.asus.calendar
package:com.asus.camera
package:com.asus.collage
package:com.asus.configupdater
package:com.asus.contacts
package:com.asus.contacts.theme.dark
package:com.asus.deskclock
package:com.asus.dm
package:com.asus.easylauncher
package:com.asus.email
package:com.asus.ephotoburst
package:com.asus.filemanager
package:com.asus.flashlight
package:com.asus.flipcover2
package:com.asus.fmradio
package:com.asus.fmservice
package:com.asus.focusapplistener
package:com.asus.gallery
package:com.asus.hardwarestub
package:com.asus.ia.asusapp
package:com.asus.ime
package:com.asus.inputdevices
package:com.asus.internal.fdctoolstate
package:com.asus.keyboard
package:com.asus.kidslauncher
package:com.asus.launcher
package:com.asus.linkrim.service
package:com.asus.livedemo
package:com.asus.livedemoservice
package:com.asus.lockscreen
package:com.asus.loguploader
package:com.asus.maxxaudio
package:com.asus.maxxaudio.audiowizard
package:com.asus.message
package:com.asus.microfilm
package:com.asus.mobilemanager
package:com.asus.mobilemanagerservice
package:com.asus.music
package:com.asus.packageinstaller
package:com.asus.playto
package:com.asus.powersaver
package:com.asus.quickmemo
package:com.asus.quickmemoservice
package:com.asus.res.defaulttheme
package:com.asus.sensorapi.service
package:com.asus.server.azs
package:com.asus.setupwizard
package:com.asus.setupwizard.suwinspireasushtmlviewer
package:com.asus.sharerim
package:com.asus.shim
package:com.asus.soundrecorder
package:com.asus.splendid
package:com.asus.splendidcommandagent
package:com.asus.supernote
package:com.asus.sysdiagnostic
package:com.asus.sysmonitor
package:com.asus.system.api
package:com.asus.systemupdate
package:com.asus.task
package:com.asus.taskwidget
package:com.asus.themeapp
package:com.asus.userfeedback
package:com.asus.weathertime
package:com.asus.webview
package:com.asus.zencircle
package:com.asus.zentalk
package:com.ecareme.asuswebstorage
package:com.facebook.appmanager
package:com.facebook.katana
package:com.facebook.orca
package:com.facebook.system
package:com.google.android.apps.docs
package:com.google.android.apps.docs.oem
package:com.google.android.apps.maps
package:com.google.android.apps.messaging
package:com.google.android.apps.photos
package:com.google.android.backuptransport
package:com.google.android.calendar
package:com.google.android.configupdater
package:com.google.android.feedback
package:com.google.android.gm
package:com.google.android.gm.exchange
package:com.google.android.gms
package:com.google.android.googlequicksearchbox
package:com.google.android.gsf
package:com.google.android.gsf.login
package:com.google.android.marvin.talkback
package:com.google.android.music
package:com.google.android.onetimeinitializer
package:com.google.android.partnersetup
package:com.google.android.setupwizard
package:com.google.android.syncadapters.contacts
package:com.google.android.talk
package:com.google.android.tts
package:com.google.android.videos
package:com.google.android.webview
package:com.google.android.youtube
package:com.instagram.android
package:com.intel.aware.awareresource
package:com.intel.aware.csp.historical.provider
package:com.intel.cws.cwsservicemanager
package:com.intel.hdmi
package:com.intel.intelligentdisplay
package:com.intel.internal.telephony.OemTelephonyApp
package:com.intel.internal.telephony.SARManager
package:com.intel.security.isa
package:com.intel.security.service
package:com.intel.sensor
package:com.intel.thermal
package:com.intel.vpp
package:com.intel.widi.uibc
package:com.monotype.android.font.mfinancehkbold
package:com.monotype.android.font.myinghei18030m
package:com.monotype.android.font.myuppyhkmedium
package:com.zinio.android.settings
package:dk.icepower.icesound

rootfs / rootfs ro,seclabel 0 0
tmpfs /dev tmpfs rw,seclabel,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,seclabel,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,seclabel,relatime 0 0
selinuxfs /sys/fs/selinux selinuxfs rw,relatime 0 0
binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,relatime 0 0
none /sys/kernel/debug debugfs rw,seclabel,relatime,mode=755 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
none /sys/fs/cgroup tmpfs rw,seclabel,relatime,mode=750,gid=1000 0 0
none /sys/fs/cgroup/memory cgroup rw,relatime,memory 0 0
tmpfs /mnt tmpfs rw,seclabel,relatime,mode=755,gid=1000 0 0
none /dev/memcg cgroup rw,relatime,memory 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
none /dev/cpuset cgroup rw,relatime,cpuset,noprefix,release_agent=/sbin/cpuset_release_agent 0 0
pstore /sys/fs/pstore pstore rw,seclabel,relatime 0 0
sepfs /sys/fs/sepfs sepfs rw,relatime 0 0
/dev/block/by-name/system /system ext4 ro,seclabel,noatime,data=ordered 0 0
/dev/block/by-name/cache /cache ext4 rw,seclabel,nosuid,nodev,noatime,data=ordered 0 0
/dev/block/by-name/config /config ext4 rw,seclabel,nosuid,nodev,noatime,data=ordered 0 0
/dev/block/by-name/data /data ext4 rw,seclabel,nosuid,nodev,noatime,discard,noauto_da_alloc,data=ordered 0 0
/dev/block/by-name/factory /factory ext4 rw,seclabel,nosuid,nodev,noatime,data=ordered 0 0
adb /dev/usb-ffs/adb functionfs rw,relatime 0 0
tmpfs /storage tmpfs rw,seclabel,relatime,mode=755,gid=1000 0 0
/dev/block/by-name/system /local_cfg/platform ext4 ro,seclabel,noatime,data=ordered 0 0
/dev/block/by-name/system /local_cfg/telephony_config ext4 ro,seclabel,noatime,data=ordered 0 0
/dev/block/by-name/system /local_cfg/audiocomms_config ext4 ro,seclabel,noatime,data=ordered 0 0
/dev/block/by-name/ADF /ADF ext4 rw,seclabel,relatime,data=ordered 0 0
/dev/fuse /mnt/runtime/default/emulated fuse rw,nosuid,nodev,noexec,noatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/fuse /storage/emulated fuse rw,nosuid,nodev,noexec,noatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/fuse /mnt/runtime/read/emulated fuse rw,nosuid,nodev,noexec,noatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/fuse /mnt/runtime/write/emulated fuse rw,nosuid,nodev,noexec,noatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/block/vold/public:179,65 /mnt/media_rw/0000-0000 texfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1023,gid=1023,umask=0007,allow_utime=0020,codepage=437,iocharset=utf8,min_prealloc_size=64k,max_prealloc_size=61036k,readahead=4M,fail_safe,hidden=show,errors=continue 0 0
/dev/fuse /mnt/runtime/default/0000-0000 fuse rw,nosuid,nodev,noexec,noatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/fuse /storage/0000-0000 fuse rw,nosuid,nodev,noexec,noatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/fuse /mnt/runtime/read/0000-0000 fuse rw,nosuid,nodev,noexec,noatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/fuse /mnt/runtime/write/0000-0000 fuse rw,nosuid,nodev,noexec,noatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0