目次
自作３号機 AMD Opteron 248 2.2GHz Dual, メモリ 4GB, RAID5 3TB
2005年4月制作の Linux 64bit Dual AMD Opteron マシン。
当時は 64bit の Linux OS で最新の技術をガンガン試すために Fedora Core 3 を導入した。
その後、Fedora Core 4, 5, 6、Fedora 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 とアップグレードし現在に至る。
RIOWORKS(Arima) HDAMB
BIOS SETUP に入るには、起動時に F2 キーを押す。
不定期メンテナンス
2020/08/07〜08/10
S.M.A.R.T 情報
| device | hpt,1/1/1 /dev/sdb | |
|---|---|---|
| 総書込量 (ホスト)[ID#: F1(241) | N/A | |
| 電源投入回数[ID#: 0C(12)] | 2,081 回 | HEX: 821 |
| 使用時間[ID#: 09(9) | 29,571 時間 | HEX: 7383 |
$ sudo smartctl -a -d hpt,1/1/1 /dev/sdb
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.4.2-1.fc16.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST31000333AS
Serial Number: 9TE20SHD
LU WWN Device Id: 5 000c50 01139774f
Firmware Version: SD15
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Aug 15 07:13:03 2020 JST
==> WARNING: There are known problems with these drives,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/207951en
http://knowledge.seagate.com/articles/en_US/FAQ/207957en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 617) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 204) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 107 099 006 Pre-fail Always - 14054427
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 821
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 4
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 145891004
9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7383
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 2
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 821
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 095 000 Old_age Always - 34360262710
189 High_Fly_Writes 0x003a 020 020 000 Old_age Always - 80
190 Airflow_Temperature_Cel 0x0022 069 058 045 Old_age Always - 31 (Min/Max 23/31)
194 Temperature_Celsius 0x0022 031 042 000 Old_age Always - 31 (0 12 0 0 0)
195 Hardware_ECC_Recovered 0x001a 055 032 000 Old_age Always - 14054427
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1518 -
# 2 Short offline Completed without error 00% 1236 -
# 3 Short offline Completed without error 00% 1203 -
# 4 Extended offline Completed without error 00% 1200 -
# 5 Short offline Completed without error 00% 1196 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
| device | hpt,1/2/1 /dev/sdb | |
|---|---|---|
| 総書込量 (ホスト)[ID#: F1(241) | N/A | |
| 電源投入回数[ID#: 0C(12)] | 2,081 回 | HEX: 821 |
| 使用時間[ID#: 09(9) | 29,570 時間 | HEX: 7382 |
$ sudo smartctl -a -d hpt,1/2/1 /dev/sdb
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.4.2-1.fc16.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST31000333AS
Serial Number: 9TE22785
LU WWN Device Id: 5 000c50 0113fbdd9
Firmware Version: SD15
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Aug 15 07:19:17 2020 JST
==> WARNING: There are known problems with these drives,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/207951en
http://knowledge.seagate.com/articles/en_US/FAQ/207957en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 617) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 207) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 186368101
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 821
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 148173402
9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7382
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 2
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 821
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 098 000 Old_age Always - 34360262682
189 High_Fly_Writes 0x003a 060 060 000 Old_age Always - 40
190 Airflow_Temperature_Cel 0x0022 069 057 045 Old_age Always - 31 (Min/Max 22/31)
194 Temperature_Celsius 0x0022 031 043 000 Old_age Always - 31 (0 12 0 0 0)
195 Hardware_ECC_Recovered 0x001a 055 033 000 Old_age Always - 186368101
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1518 -
# 2 Short offline Completed without error 00% 1203 -
# 3 Extended offline Completed without error 00% 1199 -
# 4 Short offline Completed without error 00% 1196 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
| device | hpt,1/3/1 /dev/sdb | |
|---|---|---|
| 総書込量 (ホスト)[ID#: F1(241) | N/A | |
| 電源投入回数[ID#: 0C(12)] | 2,070 回 | HEX: 816 |
| 使用時間[ID#: 09(9) | 29,571 時間 | HEX: 7383 |
$ sudo smartctl -a -d hpt,1/3/1 /dev/sdb
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.4.2-1.fc16.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST31000333AS
Serial Number: 9TE20D2R
LU WWN Device Id: 5 000c50 0113ac150
Firmware Version: SD15
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Aug 15 07:19:57 2020 JST
==> WARNING: There are known problems with these drives,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/207951en
http://knowledge.seagate.com/articles/en_US/FAQ/207957en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 625) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 206) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 219013273
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 816
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 5
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 148320814
9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7383
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 1
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 816
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 097 000 Old_age Always - 21475164181
189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 117
190 Airflow_Temperature_Cel 0x0022 068 055 045 Old_age Always - 32 (Min/Max 21/32)
194 Temperature_Celsius 0x0022 032 045 000 Old_age Always - 32 (0 11 0 0 0)
195 Hardware_ECC_Recovered 0x001a 058 033 000 Old_age Always - 219013273
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1518 -
# 2 Short offline Completed without error 00% 1203 -
# 3 Extended offline Completed without error 00% 1200 -
# 4 Short offline Completed without error 00% 1196 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
| device | hpt,1/4/1 /dev/sdb | |
|---|---|---|
| 総書込量 (ホスト)[ID#: F1(241) | N/A | |
| 電源投入回数[ID#: 0C(12)] | 1,577 回 | HEX: 629 |
| 使用時間[ID#: 09(9) | 24,944 時間 | HEX: 6170 |
$ sudo smartctl -a -d hpt,1/4/1 /dev/sdb
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.4.2-1.fc16.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST31000528AS
Serial Number: 9VP31HR0
LU WWN Device Id: 5 000c50 01a029c81
Firmware Version: CC44
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Aug 15 07:20:29 2020 JST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 198) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 155437090
3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 629
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 39
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 63494756
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6170
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 629
183 Runtime_Bad_Block 0x0000 100 100 000 Old_age Offline - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 069 058 045 Old_age Always - 31 (Min/Max 20/31)
194 Temperature_Celsius 0x0022 031 042 000 Old_age Always - 31 (0 10 0 0 0)
195 Hardware_ECC_Recovered 0x001a 045 023 000 Old_age Always - 155437090
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 189485367172802
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 474505766
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2594569521
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 301 -
# 2 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
製作当初(2005年4月)のスペック
AMD Opteron 248 2.2GHz Dual, メモリ 2GB, RAID0 1TB
OS: Fedora Core 3 x86_64
| カテゴリ | 詳細 | 単価 | 数量 | 金額 |
|---|---|---|---|---|
| CPU | Opteron 248 BOX 2.2GHz,Socket940 | 52,960 | 1 | 52,960 |
| Opteron 248 BOX 2.2GHz,Socket940 | 53,960 | 1 | 53,960 | |
| Memory | Transcend TS64MDR72V4F3DDR PC3200 512MB ECC Registered 永久保証 | 13,707 | 4 | 54,828 |
| M/B | RIOWORKS(Arima) HDAMB ATX EPS12V(24pin+8pin) uPGA Socket 940 x 2 Registered DDR400/333 184-pin DIMM x 4 Ultra DMA 133/100/66/33 8X AGP Pro slot, PCI (32bit/33MHz) x 5 Promise PDC20378 SATA x 2,PATA x 2,RAID 0 1 10 Realtek ALC-650, Professional 6-channel Audio USB x 6,IEEE1394 x 2,COM x 1,GigaLAN x 1 | 35,610 | 1 | 35,610 |
| FDD | D359M3 アイボリー バルク | 999 | 1 | 999 |
| HDD | MaXLine Plus II S-ATA 7Y250M0 | 14,679 | 2 | 29,358 |
| MaXLine Plus II P-ATA 7Y250M0 | 14,679 | 1 | 14,679 | |
| MaXLine Plus II P-ATA 7Y250M0 | 13,979 | 1 | 13,979 | |
| VGA | FX5200-DVP128LP | 6,140 | 1 | 6,140 |
| Case | Thermaltake Kandalf VA9000SWA | 27,800 | 1 | 27,800 |
| Power | Zippy-600W S-ATAII | 24,460 | 1 | 24,460 |
| Total | 314,773 | |||
後で増設または付け替えたもの。
| カテゴリ | 詳細 | 単価 | 数量 | 金額 |
|---|---|---|---|---|
| Memory | SuperTalent PC2700 DDR333 Registered ECC 2GB | 8,980 | 2 | 17,960 |
| RAID | HighPoint RocketRAID 1740 | 13,980 | 1 | 13,980 |
| HDD | Barracuda 7200.11 1TB SATA 3Gb/s 32MB 7200RPM | 7,180 | 4 | 28,720 |
| VGA | HIS Radion 4870 H467QS1GHA AGP 1GB | 不明 | 1 | 不明 |
| Total | 60,660 | |||
実はメモリ速度はスペックダウン。体感速度は変わらないが容量が倍になる分の恩恵の方が大きい。
ディスク回りはRAID5化で信頼性重視。IOPが無いタイプなのでCPUに負荷は掛かる。
